Alltemp Universal Range Bake Element UB300

Universal electric range/oven lower bake element; 2000 W, 240 V, approximately 13 in. wide by 11-7/64 in. long, with 1-7/8 in. inserts and straight screw terminals. It mounts at the bottom of the oven cavity to provide bake heat.

Is This the Right Part?

Common Symptoms

• No heat during baking
• Little or slow heat during baking
• Uneven baking heat
• Bake element does not visibly heat
• Element is visibly broken or burned

Check Before Replacing

• With power disconnected or the range circuit breaker off, visually inspect the lower bake element for cracks, breaks, blistering, or burn damage.
• Confirm the appliance is set to Bake and observe whether the lower element heats during a controlled test, following the appliance owner's instructions.
• Compare the existing element with UB300 before installation: approximately 13 inches wide by 11-7/64 inches long, 1-7/8-inch inserts, and straight screw terminals.
• Inspect the element terminals and accessible wiring for loose, damaged, or discolored connections; do not handle wiring while energized.
• If electrical testing is performed, use the appliance service documentation and appropriate electrical-safety procedures; other oven components can produce similar symptoms.

Pro Tip

Part Details

Key Features

• Alltemp universal range bake element
• 2000 W, 240 V
• Approximately 13 inches wide by 11-7/64 inches long
• 1-7/8-inch inserts
• Straight screw terminals
• Designed to mount at the bottom of the oven cavity

Installation Notes

• Disconnect electrical power or switch off the range circuit breaker before servicing.
• Allow the oven to cool completely before handling the element.
• Remove the oven racks as needed and expose the bake element according to the appliance service instructions.
• Pull the element forward only far enough to access the terminals, and prevent the appliance wires from retracting into the oven wall.
• Transfer the wires to the replacement element, position the element in its original mounting location, and reinstall the original mounting hardware.
• Restore power only after all connections and covers or panels are secure; follow the appliance manufacturer's instructions for the post-installation heat check.

Verified Compatible Models

AM001

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.