TORN OR DAMAGED LINT SCREEN
Whirlpool Corporation Dryer lint filter / lint screen WP33001003, Fixes Torn or damaged lint screen
Genuine Whirlpool OEM slide-in lint filter screen for Maytag-family dryers and stacked washer/dryer laundry centers. The screen captures lint and debris from the dryer exhaust airflow. Sources describe it as approximately 12.5 inches wide by 10 inches high and commonly used in older Maytag dryers manufactured before 1990.
Part WP33001003Replaces 33001003Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP33001003
Replaces33001003
ManufacturerWhirlpool Corporation
Appliance TypeDryer
Part TypeDryer lint filter / lint screen
✅ Cross Reference Information
Current Part NumberWP33001003
Replaces33001003
Common Symptoms
- Visible tears, holes, or splitting in the mesh
- Lint passing through instead of collecting on the screen
- Longer-than-usual drying times when the screen is clogged or damaged
- Excessive lint accumulation around the filter area or exhaust path
Check Before Replacing
- Remove the lint screen with the dryer off and inspect the mesh for tears, holes, splitting, or loose edges.
- Hold the screen up to a light source and check for open areas or damaged mesh.
- Check that the screen slides fully into its existing slot and sits flat without forcing it.
- Inspect the filter slot for packed lint or residue and clean accessible buildup with a soft brush or household vacuum.
- Clean the screen as directed by the dryer owner’s manual and reinstall it only after it is completely dry.
Pro Tip
Clean the lint screen after every drying cycle and periodically clean the filter slot; a screen can look open while still being restricted by fine lint or residue.
Part Details
Part NumberWP33001003
Part TypeDryer lint filter / lint screen
ManufacturerWhirlpool Corporation
Appliance TypeDryer
Primary FunctionCaptures lint and debris from the dryer's exhaust airflow to help maintain airflow and reduce lint accumulation.
Installation Notes
- Turn the dryer off before removing the screen.
- Remove the old screen from its slot and compare the replacement’s shape and orientation before installation.
- Slide the replacement into the existing filter slot without forcing it.
- Confirm that the screen is fully seated and does not obstruct the slot.
- Clean and dry the screen before reinstalling it if it has been washed.
Verified Compatible Models
DE18CA, DE18CM, DE18CS, DE18CT, DE19CA, DE19CD, DE19CS, DE19CT, DE21CM, DE106, DE107, DE110, DE180, DE210, DE212
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
