Choice Manufactured Parts Washer Washing machine outer tub seal / rear tub gasket 4036ER4001BCM, Fixes Water leaking from between the outer-tub halves or underneath the washer during operation
Aftermarket replacement outer-tub seal for LG-manufactured front-load washing machines. The seal sits between the front and rear outer tub halves and helps prevent water leakage. The requested identifier 4036ER4001BCM is documented by retailers as a Choice Manufactured Parts identifier corresponding to OEM LG part 4036ER4001B.
Aftermarket replacement outer-tub seal for LG-manufactured front-load washing machines. The seal sits between the front and rear outer tub halves and helps prevent water leakage. The requested identifier 4036ER4001BCM is documented by retailers as a Choice Manufactured Parts identifier corresponding to OEM LG part 4036ER4001B.
Is This the Right Part?
Common Symptoms
- Water appearing beneath the washer during fill, wash, or spin cycles
- Visible cracking, hardening, tearing, or deformation of the tub seal when the tub is accessible
- Possible bearing-related noise if a prolonged seal leak allows water to reach the tub bearings
Check Before Replacing
- Disconnect power and water supplies before inspection.
- Determine whether the leak originates from between the outer-tub halves rather than the door gasket, drain filter, hoses, or pump area.
- After the washer is safely opened according to the service documentation, visually inspect the seal for tears, brittleness, distortion, or incomplete seating.
- Check the surrounding tub and bearing area for evidence of water intrusion, without operating exposed components.
Pro Tip
Part Details
Key Features
- Aftermarket Choice Manufactured Parts identifier 4036ER4001BCM
- Flexible rubber outer-tub seal/gasket
- Installs between the front and rear outer-tub sections
- Documented as corresponding to LG OEM part 4036ER4001B
- Used in LG-manufactured front-load washer and washer-dryer-combo applications
Installation Notes
- Disconnect electrical power and shut off the washer’s water supplies before service.
- Access requires substantial washer disassembly; follow the appliance-specific service documentation.
- Remove and reinstall the retaining hardware or clamp carefully, ensuring the seal is fully seated in its groove around the tub.
- Inspect the seal and mating surfaces for debris or damage before reassembly.
- Run a controlled water-fill and wash test after reassembly to verify that the tub joint does not leak.
Verified Compatible Models
48231009799, 48231010108, CW2079CWD, CW2079CWN, F1201FD, F1201FD1, F1201FDP, F1201FDP1, F1216FDS, F1216FDS1, F1253FDS, F1254FD, F1254FD1, F1254FD3, F1255FD5, WD-10460BD, WM3470HVA, FH069FD4FS, FH069FDFS, F1255RDS7, F52592WH, F1255FD1, FH255FDC, F1258FDS9, F32586IXS, WD12270FD, F1069FDP, F1255FDS7, F1069FD4S, F1069FD7
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
