Whirlpool Corporation Range Oven lower bake element WP74003019, Replaces 74003019, 7406P064-60, 7406P092-60, 04000058, Y04000058

Genuine OEM lower oven bake heating element with push-on terminals. The element is located at the bottom of the oven and supplies heat for baking. Documented specifications include approximately 2,800 watts at 240 volts.

Is This the Right Part?

Common Symptoms

• Bake cycle produces little or no heat.
• Oven heats slowly or unevenly during baking.
• Bake element shows visible blistering, cracking, melting, or a burned-open section.
• Element terminals or connected wires show arcing or heat damage.

Check Before Replacing

• With the range unplugged or its circuit breaker switched off, visually inspect the element for cracks, blistering, melting, or an obvious burned-open section.
• With power disconnected, inspect both push-on terminals and the accessible wire connectors for looseness, arcing, corrosion, or burning.
• If qualified to use a multimeter, test the element for continuity only after disconnecting appliance power and isolating the element wiring; an open circuit indicates a failed element, but continuity alone does not prove the element is good.
• Confirm that the bake element is the component intended for the appliance model before ordering or installing it.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM lower oven bake element.
• Push-on male spade terminals.
• Approximately 2,800 watts at 240 volts.
• Approximately 19 inches overall length with a 3-inch terminal depth, according to parts listings.
• Designed for the lower portion of the oven and the bake function.

Installation Notes

• Disconnect electrical power by unplugging the range or switching off the applicable circuit breaker before service.
• Remove the retaining screws and carefully pull the element forward far enough to disconnect the two push-on wire terminals.
• Support or retain the appliance wires so they do not fall behind the oven wall.
• Inspect the terminals and wire connectors for burning or arcing before reconnecting the replacement element.
• Reconnect the wires, position the element as the original, reinstall the retaining screws, and restore power only after the element is secured.
• Follow the appliance-specific manufacturer manual because access and mounting details may vary by model.

Verified Compatible Models

6892XRW, A3637XRW, A3888XRA, C3888XRA, CE3878XRW, CRE7500ACW, CRE9400ACW, L3581VUV, L3581XRA, L3882XRW, N3832XRW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.