Whirlpool Range bake/broil igniter, horizontal mount XP7432P136-60, Replaces 7432P136-60, 7432P131-60, 31991701, 32009801, 74008064

Whirlpool OEM horizontal-mount gas range bake/broil igniter with wire connector. The igniter uses electrical current to open the oven safety valve and ignite the gas burner. Documented specifications include approximately 3.4–3.6 A, a 90-degree bracket, and approximately 7.75-inch leads.

Is This the Right Part?

Common Symptoms

• Igniter does not glow when bake or broil is selected.
• Igniter glows but the burner does not ignite.
• Oven heats slowly or fails to reach the selected temperature because the igniter is weak and does not draw enough current to open the safety valve.

Check Before Replacing

• With the appliance cool, observe whether the igniter glows when the oven calls for bake or broil; do not touch the igniter during or immediately after operation.
• If the igniter glows but no flame appears, stop using the oven and have the gas supply, safety valve, wiring, and igniter circuit checked by a qualified technician.
• A qualified technician can verify the igniter circuit and current draw against the part's approximately 3.4–3.6 A specification; a continuity check alone does not establish that the igniter is strong enough to open the safety valve.
• Before any physical inspection or replacement, disconnect electrical power and shut off the appliance gas supply.

Pro Tip

Part Details

Key Features

• Whirlpool OEM bake/broil igniter.
• Horizontal-mount configuration with wire connector.
• Approximately 3.4–3.6 A operating-current specification.
• 90-degree mounting bracket.
• Approximately 7.75-inch leads.
• Usable for either bake or broil ignition depending on the range design.

Installation Notes

• Disconnect electrical power and shut off the appliance gas supply before servicing.
• Allow the oven to cool completely before accessing the igniter.
• Handle the ceramic igniter element carefully because it is fragile.
• Match the replacement's horizontal bracket orientation, connector, lead length, and routing to the original before securing it.
• After installation, restore power and gas, then verify ignition while keeping hands and tools away from the hot igniter and burner area; stop if gas odor or abnormal operation occurs.

Verified Compatible Models

ACF3315AK, ACF3315AT, ACF3325AB, ACF3325AC, ACF3325AS, ACF3325AW, ACF3335AB, ACF3335AB-PACF3335AB2, ACF3335AC, ACF3335AC-PACF3335AC2, ACF3335AS, ACF3335AW, ACF3335AW-PACF3334AW1, ACF3335AW-PACF3335AW2, ACF3355AB

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.