Whirlpool Refrigerator LED Light Assembly (Flat Lens) W10515058

Genuine Whirlpool refrigerator LED light assembly with a flat lens, used for interior refrigerator lighting. The assembly is identified in Whirlpool parts documentation as an LED light assembly with flat lens.

Is This the Right Part?

Common Symptoms

• The ceiling refrigerator light does not illuminate when the door is opened.
• The LED assembly is dim or intermittently flickers.
• Multiple refrigerator/freezer lights may be dim or strobe when another LED module in the same lighting circuit has failed.

Check Before Replacing

• Confirm the refrigerator has power and that the interior light is expected to activate when the door is opened.
• Inspect the light cover and assembly for visible damage, moisture, or contamination without disassembling the energized appliance.
• With refrigerator power disconnected, check that the light connectors are fully seated and that wiring is not visibly loose or damaged.
• If several refrigerator or freezer LEDs are affected, check the other LED modules in the circuit before replacing this assembly; a failed related module can affect the lighting circuit.
• Verify the replacement against the complete refrigerator model number and compare the connector arrangement and flat-lens design before installation.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool LED light assembly.
• Flat-lens refrigerator light design.
• Used as the main ceiling LED assembly in compatible Whirlpool-family refrigerators.
• Listed by Whirlpool parts sources under manufacturer number WPW10515058 as the replacement for W10515058.
• The assembly is part of a refrigerator LED lighting circuit that may include related W10515057 modules.

Installation Notes

• Disconnect refrigerator power before removing or installing the light assembly.
• Use the appliance-specific service information because cover retention and mounting details can vary by model.
• Remove the light cover carefully, disconnect the wiring connectors, and retain connector orientation for reassembly.
• Seat the replacement assembly fully in its housing and reinstall the cover before restoring power.
• After installation, restore power and verify illumination with the refrigerator door open.
• If the replacement does not correct dimming or flickering, inspect the related LED modules and circuit rather than repeatedly replacing this assembly.

Verified Compatible Models

7WRS22FDBF00, 7WRS22FDBF02, 7WRS22FDBW00, 7WRS22FDBW02, 7WRS22FEBF00, 10641123212, 10651134213, 10651792412, MSF25D4XAB00, WRS322FDAB02, WRS322FNAB00, WRS325FDAB02, WRS325FDAM02, WRS331FDDB01, WRS346FIAB00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.