Brada Dryer Parts Canada – Samsung-Built Dryer Parts & Repair Guide

Brada Dryer Parts Canada – Samsung-Built Dryer Replacement Parts & Repair Guide

If you own a Brada dryer and need replacement parts, you're in the right place. Many Brada dryers sold in Canada were manufactured by Samsung — which means the OEM parts you need are Samsung dryer parts, not Brada-branded components.

Always confirm by model number before ordering. Known Samsung-built Brada dryer models include the BED70B/XAC and BED70W/XAC. If your model matches, the Samsung part numbers listed below are your starting point. Not sure? Send us your model number and we'll confirm compatibility before you order.

→ Read the full guide: Brada Dryer Parts Canada: Samsung-Built Dryer Replacement Parts

Top Brada / Samsung Dryer Replacement Parts

Part Number Part Type Common Symptom
6602-001655 Dryer Drive Belt Drum not spinning, motor runs
DC47-00019A Heating Element No heat or insufficient heat
DC96-00887A / DC96-00887C Thermal Fuse No heat, fuse blown from overheating
DC93-00634A Idler Pulley Assembly Squealing, belt slipping, thumping
DC97-16782A Drum Support Roller Loud rumbling or squeaking
DC64-00828B Door Switch Dryer won't start despite having power
DC61-02595A Lint Case Filter Restricted airflow, thermal fuse failures
DC97-16742A Lint Screen Restricted airflow, overheating
DC61-02634A / DC61-02627A Moisture Sensor Dryer runs too long or stops too early
DC92-02388A Main Control Board Unresponsive controls, error codes, no start
DC47-00016A Thermal Cut-Off Thermostat No heat, thermal protection
DC47-00018A High-Limit Thermostat Overheating protection failure
DC32-00007A Thermistor Incorrect temperature readings
DC93-00154A Heating Element Assembly No heat — complete thermal assembly
DC47-00015A Thermostat Temperature regulation failure
DC92-01729W PCB Main Control Board Control system failure
DC97-16931B Control Knob Cracked or stripped knob, no cycle selection

Additional Part Numbers

DC61-02610A · DC63-01140A · DC62-00344A · DC97-21429B · 6009-001522 · DC61-03048A · DC97-07618A · DC97-17965A · DC31-00055H

How to Identify Your Brada Dryer Model

  1. Find the model sticker — located inside the dryer door frame or on the back panel.
  2. Look for BED70B/XAC or BED70W/XAC — these are confirmed Samsung-built Brada models.
  3. Match the part number — use the table above or contact us with your model number for confirmation.

Why Brada Dryer Parts Are Hard to Find

Brada was a Canadian appliance brand that sourced manufacturing from major OEMs including Samsung. When Brada-branded appliances needed service, parts were never widely stocked under the Brada name — they were always serviced using the OEM manufacturer's part numbers. This is why searching for "Brada dryer belt" or "Brada heating element" returns few results: the correct search is the Samsung part number for your specific model.

XPart Supply stocks genuine OEM Samsung dryer parts and ships across Canada. We can cross-reference your Brada model number to the correct Samsung part before you order.

Related Resources