Kenmore Dishwasher Model 665.13804N710 Parts

MODEL PARTS & REPAIR GUIDE

Kenmore 665.13804N710 Dishwasher Parts & Repair Guide

Find replacement parts for the Kenmore 665.13804N710 dishwasher, including inner door panels, pump and motor assemblies, upper dishrack stops, overfill components, and other linked parts.

🇨🇦 Canadian Business Since 1996
⭐ 30 Years of Appliance Experience
🚚 Fast Shipping Across North America
✓ Wrong Part Protection
MODEL
665.13804N710

Kenmore Dishwasher

7 verified XPart product pages linked for this exact model.

Need help choosing the right part?

Not sure which part you need? Compare the part number on your original component and send XPart Supply your full model number 665.13804N710 and symptoms for fit help.

Check Fit With XPartSearch This Model

Find a Part by Symptom

These symptom links come only from research attached to the currently verified parts. A symptom can have more than one cause.

Cracked, dented, or damaged dishwasher inner door panel.Visible cracks in the inner door panelPoor cleaning because the spray arms receive little or no circulating water.Dishes remain dirty after a completed cycle.Dishwasher fills but does not spray or clean dishes properly.Poor cleaning performanceThe upper dishrack slides too far or comes off its rails.Upper rack stop clip is broken, missing, loose, or no longer locks onto the rail.Float assembly does not actuate the overfill switch.A worn or broken housing can prevent the float assembly from actuating the float switch.

Replacement Parts for Kenmore 665.13804N710

Every product link below is checked against XPart's verified model-compatibility data and the live Shopify product page before this hub is built.

Door & Hardware (1)

Pumps & Water Circulation (2)

Racks & Baskets (2)

Replacement Parts (1)

Water Inlet (1)

Looking for another Kenmore Dishwasher part? Browse Kenmore Dishwasher parts or search by the exact part number printed on your original component.

Kenmore 665.13804N710 Compatibility

This guide is specifically for Kenmore Dishwasher model 665.13804N710. Only XPart product pages backed by verified model compatibility are linked here. Always compare the complete appliance model number and replacement part number before ordering.

Before You Order

  • Confirm the complete appliance model number from the model/serial label.
  • Compare the original component part number when it is visible.
  • Review replacement or supersession information on the linked XPart product page.
  • If diagnosis is uncertain, contact XPart Supply before ordering.

Frequently Asked Questions

Which part provides the dishwasher door’s interior surface?
W11612333 is the inner door panel. It provides the interior surface and structural mounting surface of the dishwasher door and may relate to visible cracks, dents, or damaged interior finish.
Which parts circulate wash water?
W11025157 is a Pump and Motor Assembly, while W11612326 is a Circulation Pump and Motor Assembly. Both are linked to moving or circulating wash water through the dishwasher spray arms.
What part helps stop the upper dishrack from sliding off its rails?
WP8565925 is the upper dishrack stop clip. It stops the rack at the end of its support rails and may be relevant if the clip is broken, missing, loose, or no longer limits rack movement.
What does the overfill standpipe support?
W10316267 is the Standpipe, Overfill. It holds and supports the dishwasher float stem and float switch as part of the overfill-protection system.
Is touch-up paint available for this dishwasher model hub?
WP676455 is listed as Dishwasher Dishrack Vinyl Touch-Up Paint (Gray). Its supplied part facts do not include a primary function, symptom, or common symptoms.