KitchenAid KSM152 Parts – Artisan Series 5-Quart Tilt-Head Mixer

KitchenAid KSM152 Replacement Parts

Artisan Series · 5-Quart · Tilt-Head · OEM & XPart Aftermarket Options

The KitchenAid KSM152 is a custom metallic finish variant of the Artisan Series 5-quart tilt-head stand mixer. It shares the same internal architecture as the KSM150PS — 325-watt motor, 10-speed planetary drive, and standard KitchenAid power hub — making most internal repair parts interchangeable between these models.

✓ Model-Specific Repair Pages

Don't see your part? Contact us and we'll help you find it.

The KSM152 uses the same worm gear, carbon brushes, speed control board, and attachment hub as the KSM150PS. The primary difference is the custom metallic finish on the housing — cosmetic panels and bowl colors differ, but all mechanical and electrical components are shared. When ordering internal parts, cross-reference with KSM150PS part numbers for the widest availability.

⚠️ Pro tip: The KSM152 shares all internal parts with the KSM150PS. If you can't find a part listed under KSM152, search KSM150PS — the worm gear, brushes, speed board, and hub components are identical.

✓ Common Symptoms Fixed

Grinding or clicking noise: Worn worm gear — replace gear + grease pack together.

Mixer shuts off mid-use: Carbon motor brushes worn — replace both at the same time.

Speed jumps or won't hold: Speed control board failure.

Grease leaking from head: Worm gear housing seal degraded — full gear + grease service recommended.

Bowl wobbles or won't lock: Bowl locking tab or base pin worn.

✓ Key Features & Specifications

Model: KSM152 | Series: Artisan Custom Metallic | Type: Tilt-Head

Bowl Capacity: 5 Quarts | Motor: 325 Watts | Speeds: 10

Attachment Hub: Standard KitchenAid Power Hub

✓ Buying Options

OEM Parts: Original KitchenAid factory parts — exact fit, full manufacturer specifications.

XPart Aftermarket: Premium aftermarket replacements engineered to OEM specifications. XPart aftermarket replacement parts are not affiliated with, sponsored by, or endorsed by KitchenAid or any OEM manufacturer.

✓ Replacement Part Numbers

W10916114 (Worm Gear) | W10490648 (Carbon Brush Set) | W10119326 (Speed Control Board) | W10820039 (Grease Pack) | 9709231 (5-Qt Stainless Bowl) | W10672878 (Flat Beater) | W10672879 (Dough Hook) | W10672880 (Wire Whip)

✓ Installation Tips

Unplug before any repair. Access the worm gear by removing the single screw on the back of the head and lifting the motor cover. Always clean old grease completely before repacking. The KSM152 housing finish is delicate — use a soft cloth when removing panels to avoid scratching.

✓ Related Models