KitchenAid KSM195 Parts – Artisan Series 5-Quart Tilt-Head Mixer

KitchenAid KSM195 Replacement Parts

Artisan Series · 5-Quart · Tilt-Head · OEM & XPart Aftermarket Options

The KitchenAid KSM195 is an Artisan Series 5-quart tilt-head stand mixer, typically sold as a bundle with a pasta attachment or additional accessories. It shares the same 325-watt motor, 10-speed planetary drive, and internal components as the KSM150PS — all mechanical and electrical repair parts are interchangeable.

✓ Model-Specific Repair Pages

Don't see your part? Contact us and we'll help you find it.

The KSM195 is mechanically identical to the KSM150PS. The worm gear, carbon brushes, speed control board, grease pack, and all attachment hub components are shared. Bundle attachments (pasta roller, etc.) have their own part numbers — contact us for attachment-specific parts.

⚠️ Pro tip: KSM195 internal parts are identical to KSM150PS. If a part isn't listed under KSM195, cross-reference with KSM150PS part numbers for the widest availability.

✓ Common Symptoms Fixed

Grinding noise: Worm gear worn — replace with grease pack.

Shuts off mid-use: Carbon brushes worn — replace both.

Erratic speed: Speed control board failure.

Grease leaking from head: Full gear + grease service needed.

✓ Key Features & Specifications

Model: KSM195 | Series: Artisan Bundle | Type: Tilt-Head

Bowl Capacity: 5 Quarts | Motor: 325 Watts | Speeds: 10

✓ Buying Options

OEM Parts: Original KitchenAid factory parts — exact fit, full manufacturer specifications.

XPart Aftermarket: Premium aftermarket replacements engineered to OEM specifications. XPart aftermarket replacement parts are not affiliated with, sponsored by, or endorsed by KitchenAid or any OEM manufacturer.

✓ Replacement Part Numbers

W10916114 (Worm Gear) | W10490648 (Carbon Brush Set) | W10119326 (Speed Control Board) | W10820039 (Grease Pack) | 9709231 (5-Qt Stainless Bowl) | W10672878 (Flat Beater) | W10672879 (Dough Hook)

✓ Installation Tips

Unplug before any repair. Access the worm gear by removing the single screw on the back of the head and lifting the motor cover. Clean all old grease before repacking.

✓ Related Models