WASHER BASKET OR DRUM DOES NOT SPIN OR AGITATE WHILE THE MOTOR MAY RUN
Frigidaire / Electrolux Washer drive belt, 6-rib 134051000, Fixes Washer basket or drum does not spin or agitate while the motor may run
Genuine OEM 6-rib inner-tub drive belt connecting the washer drive motor to the wash basket or drum. Used in compatible belt-driven washers for spinning and agitation.
Part 134051000Replaces 131276300Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number134051000
Replaces131276300
ManufacturerFrigidaire / Electrolux
Appliance TypeWasher
Part TypeWasher drive belt, 6-rib
✅ Cross Reference Information
Current Part Number134051000
Replaces131276300
Common Symptoms
- Slow or weak spinning
- Failure to agitate
- Burning-rubber smell
- Squealing or loud belt noise
- Washer will not drain because the drive system is not operating normally
Check Before Replacing
- Unplug the washer before inspection.
- Inspect the belt for breakage, fraying, cracking, glazing, missing ribs, or visible belt dust.
- With power disconnected, check whether the belt is seated correctly on the motor shaft and drive pulley.
- With power disconnected, manually rotate the drive pulley or basket as appropriate and check for obvious binding or abnormal resistance.
- Inspect the motor and drive pulleys for damage, contamination, or apparent misalignment before condemning the belt.
Pro Tip
If a replacement belt fails again or slips shortly after installation, inspect the pulleys and related drive components for binding, wear, contamination, or misalignment rather than replacing the belt alone.
Part Details
Part Number134051000
Part TypeWasher drive belt, 6-rib
ManufacturerFrigidaire / Electrolux
Appliance TypeWasher
Primary FunctionTransfers motor torque to the washer drive system so the basket or drum can agitate and spin.
Installation Notes
- Disconnect electrical power before removing panels or handling the belt.
- Follow the model-specific service instructions because panel access and belt routing can vary.
- Install the belt with the ribbed side seated in the matching pulley grooves.
- After installation, confirm that the belt is fully seated and tracks correctly on both pulleys before restoring power and water connections.
Verified Compatible Models
CRTF1240AS0, CRTR9300AS0, FTF530ES0, FTR630AS0, FWTB8200DS0, FWTBB30DS0, GLEH1642DS0, GLGH1642DS0, GLTF530DS0, GLTF1040AS0, GLTF1240AS0, GLTF1670AS0, GLTF2070CS0, GLTF2070DS0, GLTR1670AS0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
