Gas Appliance Too Far From the Wall Outlet? Gas Hose 3/8" × 10' – Safe, Flexible Gas Line Connection Fast

A rigid or too-short gas line is one of the most common installation headaches when positioning ranges, dryers, and other gas appliances — and a quality flexible connector is the only safe solution. In most residential gas appliance installations, connection problems are caused by a missing, undersized, or deteriorated flexible gas hose. When the hose is absent or too short, the appliance cannot be safely positioned, serviced, or moved for cleaning without shutting off the gas supply entirely. ⚡ The most frequently needed gas accessory during range, dryer, and BBQ installations — especially in older homes where the shutoff is not ideally located. NG-10 is a 10-foot flexible natural gas hose with 3/8" fittings that provides a safe, code-compliant connection between your gas supply line and appliance.

❓ Is This the Right Hose?

This is the correct choice if ALL of the following are true:

• ✔ Your appliance runs on natural gas (not propane — different hose required)
• ✔ Your gas supply line and appliance inlet both use 3/8" fittings
• ✔ You need up to 10 feet of flexible hose length
• ✔ ONLY issue is connection length, flexibility, or replacement of an old deteriorated hose

Not sure? Send us your appliance make and model — we'll confirm the right hose before you order.

🔧 Common Use Cases

• Gas range or oven positioned away from the wall shutoff valve
• Gas dryer installation where the supply line doesn’t reach the appliance inlet
• Replacing a cracked, kinked, or corroded old gas connector
• Moving a gas appliance for cleaning or renovation without disconnecting the supply
• New construction or kitchen renovation requiring a longer flexible run
• BBQ or outdoor gas appliance connection to a natural gas supply line

✔ If these use cases match, this is the correct hose for your installation.

✔ In most cases, the NG-10 provides enough length and flexibility to complete the installation without modifying the gas supply line.

📦 Product Details

• SKU: NG-10
• Type: Flexible Natural Gas Connector Hose — 3/8" fittings, 10-foot length
• Gas Type: Natural Gas only — not for use with propane
• Fitting Size: 3/8" on both ends
• Length: 10 feet (120 inches)
• Compatible Appliances: Gas ranges, gas dryers, gas BBQs, gas fireplaces, and other natural gas appliances with 3/8" inlets

⚙️ Installation

Skill Level: Easy — 15–20 minutes. Gas shutoff required before beginning. Shut off the gas supply at the nearest shutoff valve before disconnecting any fittings. Apply yellow PTFE gas tape to all male threads, hand-tighten the hose fittings onto the supply line and appliance inlet, then snug with a wrench — do not overtighten. Restore gas supply and test all connections with soapy water or a gas leak detector before operating the appliance. If bubbles appear at any fitting, shut off gas immediately and re-seal.

✓ Compatible Appliances

Compatible with any natural gas appliance using 3/8" inlet fittings including gas ranges, gas dryers, gas BBQs, and gas fireplaces. Contact us to confirm compatibility before ordering.

💡 Pro Tip