LG Washer Dispenser Inlet Hose 5214ER4001B, Replaces 5214ER4001A

Dispenser inlet hose that carries water from the water inlet valve to the detergent dispenser.

Is This the Right Part?

Common Symptoms

• Water leaking inside or beneath the washer during filling
• Hose slipping off a connection under water pressure
• Reduced or interrupted water flow to the dispenser when the hose is kinked, cracked, or obstructed

Check Before Replacing

• With the washer unplugged and water supply turned off, visually inspect the hose for cracks, pinholes, kinks, abrasion, or loose connections.
• Check that both hose ends remain fully seated at the water inlet valve and dispenser.
• After inspection and reassembly, restore water and power and observe a fill cycle for leakage; stop the cycle if water leaks.

Pro Tip

Part Details

Key Features

• Genuine LG OEM washer dispenser inlet hose
• Routes water between the inlet valve and detergent dispenser
• Used on select LG and Kenmore washing machines
• Replacement hose only; verify the appliance model before ordering

Installation Notes

• Unplug the washer and turn off the water supply before servicing.
• Access may require removing the washer top panel according to the model-specific service procedure.
• Disconnect the old hose from the inlet valve and dispenser, then seat the replacement hose fully at both connection points.
• Reposition the existing tension clamps or specified retainers securely before reinstalling the panel.
• Restore water and power, then check the first fill cycle for leaks.

Verified Compatible Models

TCW2013QS1, WKEX200HBA, WM1812CW, WM2301HR, WM3400CW - ABWEUUS, WM3460CV, WM3600HWA, WM3600HWA - ABWEUUS, WM3600HWA - ABWEVUS, WM3900HBA, WM3998HBA, WM4000HWA, WM4200HWA, WM8100HVA, WM3770HVA/01, WM2177HW, WM2301HS, WM3700HVA, WM3370HVA, WM3370HVA/01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.