Freezer Not Staying Cold? Freezer Door Gasket 5304537408 – Fix Warm-Air Leaks & Frost Buildup Fast
Warm air leaking into your freezer and frost building up around the door? In most Frigidaire-built freezers, this is caused by a failed door gasket. When it fails, the freezer loses its airtight seal, letting warm humid air in — driving up frost, energy use, and spoilage. ⚡ Common failure point in Frigidaire-built refrigerators and freezers. Part 5304537408 is the genuine OEM light-gray magnetic replacement gasket that restores a tight, reliable seal.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Freezer powers on and runs normally
- ✔ Compressor and cooling are working — it gets cold
- ✔ Door hinges and alignment are OK
- ✔ ONLY problem is the door not sealing — gaps, frost at the edges, or warm air getting in
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Frost or ice building up around the freezer door edges
- Freezer running constantly or higher energy bills
- Visible gaps, cracks, or a torn/hardened gasket
- Door not closing flush or sealing tightly
✔ If these symptoms match, the door gasket is the most likely failed component in the system.
✔ In most cases, replacing this gasket restores normal operation immediately.
📦 Part Details
- Part Number: 5304537408
- Type: Light-gray magnetic freezer-drawer door gasket
- Replaces: 241778302, 241778304, 241778308, 5304501270, 5304502761, 5304502762, 5304502840, 5304502841, 7241778302, 7241778304
- Brands: Electrolux, Frigidaire, Kenmore (Frigidaire-built), Crosley, White-Westinghouse
While the gasket is off, inspect the door hinges and closure alignment — a warped door or worn hinge will defeat even a brand-new gasket. Clean the sealing surface thoroughly before installing.
⚙️ Installation
Skill Level: EASY — about 20–30 minutes. Disconnect power before servicing. Peel back the old gasket to expose the retaining screws or clips, remove the worn gasket, then press the new magnetic gasket evenly into the channel starting at the top corners and working around. Close the door and check for a flush, gap-free seal.
✓ Compatible Models
Confirmed compatible with 25370347410, 25370417410, 2537041341C plus additional Frigidaire-built models. Contact us to verify your model number before ordering.
💡 Pro Tip
If the new gasket looks kinked from packaging, lay it in warm water or a warm room for a few minutes before installing — it relaxes the rubber so it seats flat and seals evenly the first time.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
