LG Dryer Gas Valve Assembly AGM30063309, Replaces 5221EL2002A, 5221EL2002C, 5221EL2004A

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Igniter glows but the burner does not ignite
• Dryer begins heating, then stops heating during the cycle
• Dryer requires unusually long drying times
• Loads remain damp when the cycle ends

Check Before Replacing

• Confirm the dryer is receiving gas and that the external gas shutoff valve is open.
• Observe the ignition sequence through the approved service access area: an igniter that glows but is not followed by burner ignition can indicate a valve-solenoid or gas-supply problem, but does not by itself prove valve failure.
• If heating stops after the dryer warms up, compare the ignition sequence during a later heat cycle; intermittent operation can be consistent with a failing solenoid, but other heating components should also be checked.
• Do not bypass safety devices, disconnect gas tubing, or perform energized gas-circuit testing unless qualified to service gas appliances.

Pro Tip

Part Details

Installation Notes

• Unplug the dryer and shut off its gas supply before installation.
• The replacement may require transferring the burner orifice from the original valve; follow the appliance service documentation for the exact procedure.
• Wear protective work gloves when transferring the orifice.
• Because installation involves the appliance gas circuit, use a qualified appliance technician if you are not trained to disconnect and reconnect gas components.
• After gas connections are restored, check for leaks using an appropriate leak-detection method before operating the dryer.

Verified Compatible Models

79671412410, 79671412910, 79671415910, 79671417910, 79671419910, 79671422410, 79671423410, 79671512211, 79671522211, 79671523211, 79671552610, 79671622310, 79671623310, 79679272012, 79691362910

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.