NO ICE PRODUCTION
Samsung Refrigerator Ice Maker Assembly DA97-18859A, Fixes No ice production
Complete Samsung refrigerator ice maker assembly containing the ice maker and housing, used to restore automatic ice production.
Part DA97-18859AReplaces DA97-13718ASamsung
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberDA97-18859A
ReplacesDA97-13718A
ManufacturerSamsung
Appliance TypeRefrigerator
Part TypeIce Maker Assembly
✅ Cross Reference Information
Current Part NumberDA97-18859A
ReplacesDA97-13718A
Common Symptoms
- No ice production or the ice maker does not cycle.
- Slow or intermittent ice production.
- Ice cubes remain in the mold and are not ejected.
- Ice maker clicks or begins cycling but does not complete a harvest cycle.
- Water enters the mold but cubes do not release.
- Visible damage to the ice mold or ice-maker mechanism.
Check Before Replacing
- Confirm the refrigerator’s ice-maker function is enabled and the ice bin is correctly positioned.
- Inspect the ice-maker mold, ejector area, and surrounding ice compartment for abnormal frost or ice buildup.
- Check the fill tube for a visible ice blockage without probing or damaging the tube.
- Verify that the refrigerator has water available and that the water filter is not visibly clogged or overdue for replacement.
- Inspect the ice-maker wiring harness and connector for looseness or visible damage with power disconnected.
- If the appliance’s service documentation provides a user-accessible ice-maker test function, follow that procedure rather than forcing the mechanism manually.
Pro Tip
Before replacing the ice-maker assembly, check the water inlet path and valve: a failed inlet valve, frozen fill tube, restricted filter, or inadequate water supply can produce the same no-ice symptom.
Part Details
Part NumberDA97-18859A
Part TypeIce Maker Assembly
ManufacturerSamsung
Appliance TypeRefrigerator
Primary FunctionFills the ice mold with water, freezes the water into cubes, and ejects the cubes into the ice container.
Installation Notes
- Disconnect electrical power before servicing and safely protect perishable food while the refrigerator is powered off.
- Shut off the water supply if required by the appliance’s service procedure.
- Remove the ice bin and any access components specified for the refrigerator model.
- Photograph or label the original wiring-harness routing and connector orientation before removal.
- Before securing the replacement, compare connector, mounting, fill-tube, and housing positions with the original assembly.
- Reconnect the harness securely, reinstall the ice bin and access components, then restore power and verify operation according to the refrigerator’s instructions.
Verified Compatible Models
RF22K9381SG/AA, RF22K9381SR/AA, RF22KREDBSG/AA, RF22KREDBSR/AA, RF22M9581SG/AA, RF22M9581SR/AA, RF22N9781SG/AA, RF22N9781SR/AA, RF23J9011SG/AA, RF23J9011SR/AA, RF23M8070SR/AA, RF23M8090SG/AA, RF23M8090SR/AA, RF24FSEDBSR/AA, RF24J9960S4/AA
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
