DC96-00887C Samsung Dryer Thermal Fuse — Dryer Runs But Produces No Heat

DC96-00887C Dryer Thermal Fuse — The thermal fuse is a one-time-use safety device that cuts power to the heating element when the dryer exceeds 320°F (160°C). When it blows — almost always from a clogged lint filter or blocked exhaust vent — the drum keeps spinning but the dryer produces zero heat. Clothes come out damp no matter how long the cycle runs. This is the correct thermal fuse for Samsung DV and DVE series dryers, available in genuine OEM and premium XPart aftermarket options. Critical: always clear the root cause before replacing the fuse or the new one will blow again.

Is This the Part You Need?

• Dryer runs and drum spins but produces no heat at all
• Clothes remain damp or cold after a full cycle
• Dryer shuts off early or displays a heating error code
• Air coming from the dryer is cold throughout the entire cycle
• Multimeter test shows no continuity across the thermal fuse terminals
• Dryer recently had a clogged lint filter or blocked exhaust vent

Part Details

• OEM Part Number: DC96-00887C
• Replaces: DC96-00887A, N160, AP4201894, PS4204771, 1185515, 35001193, AH203848, 2074129, WP35001193
• XPart SKU: DC96-00887CXP
• Manufacturer: Samsung
• Temperature Rating: 320°F / 160°C — one-time-use, cannot be reset
• Compatible Brands: Samsung
• Component: Thermal fuse — mounts on heating element housing
• Options: OEM New · XPart New · OEM Used · XPart Used

Installation Notes

• Skill Level: Beginner — easy DIY repair
• Estimated Time: 20–30 minutes
• Always unplug the dryer before beginning — never work on a live appliance
• Access the fuse by removing the back panel on most Samsung models
• The fuse is mounted on the side of the heating element housing — two screws and two wire terminals
• Before reassembling: clean the lint filter and inspect the full exhaust vent path for blockages — a clogged vent is the most common cause of thermal fuse failure. Skip this and the new fuse will blow again
• Reassemble, plug in, and run a test cycle on high heat to confirm

Compatible Models

Fits select Samsung DV and DVE series electric and gas dryers. Confirm your model number on the label inside the door frame before ordering.

DV40J3000EW/A2 · DV42H5000EW/A3 · DV42H5000EW/AC · DV42H5200EP/A3 · DV42H5200EP/AC · DV42H5200EW/A3 · DV42H5200EW/AC · DV45H6300EW/A3 · DV45H6300EW/AC · DV45H7000EW/A2 · DV45H7000EW/AC · DV45K6200EW/A3 · DV45K6500EV/A3 · DV48H7400EW/A2 · DV48J7700EW/A2 · DV48J7770EP/A2 · DV50K7500EV/A3 · DV50K7500EW/A3 · DV56H9000EP/AC · DV56H9000EW/A2 · DV56H9100EG/A2 · DV56H9100EG/AC · DV56H9100EW/A2 · DVE52M8650W/A3 · DVE54M8750V/A3

✓ Model-Specific Repair Pages