Frigidaire Range Surface Element Switch 318293811, Replaces 318220001, 318220061, 318369601

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• The designated surface element will not start or turn on.
• The designated surface element has no heat output when its control is selected.
• The designated burner’s heat does not respond normally to its control setting.

Check Before Replacing

• Before any inspection, disconnect range power at the plug or house circuit breaker.
• Confirm whether the problem is limited to the designated large surface burner rather than affecting multiple burners.
• With power disconnected, inspect the burner element and its receptacle/visible connections for damage or overheating before attributing the fault to the switch.
• If the range has another known-good same-size element that the manufacturer permits swapping, compare operation after reinstalling it; an unchanged symptom can help rule out the removable element, but does not by itself prove the switch is defective.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power at the plug or house circuit breaker before replacement.
• Wear gloves to protect hands during range service.
• Use the appliance model's service information and preserve the existing wire-terminal placement when replacing the control; incorrect wiring can create an electrical hazard.
• Restore power only after the switch and control-panel area have been fully reassembled.

Verified Compatible Models

79090102204, 79090102206, 79090102207, 79090152303, 79090152304, 79090152305, 79090152307, 79090152308, 79090153403, 79090153404, 79090153405, 79090153406, 79090153408, 79090153409, 79090154303

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.