The WG02F05395 is the OEM bake element for GE 30" electric ranges, rated at 3000W and responsible for all bottom-heat baking and broiling functions. When this element burns out or fails, your oven stops heating from the bottom — leading to undercooked food, uneven baking, or a completely cold oven. Replacing it is one of the most common and straightforward range repairs, and this is the exact part GE specifies for the job.

✓ Model-Specific Repair Pages

Find parts and repair guides specific to your GE range model:

Don't see your model? Contact us and we'll confirm compatibility.

The WG02F05395 bake element measures approximately 19" wide x 16" deep and mounts to the oven floor via two rear terminal connections. It draws 3000W at 240V, making it one of the higher-wattage elements in GE's 30" lineup. This element is also cross-referenced under WB44T10011 and WB44X200 in older GE service documentation. Always disconnect power before replacing any oven element.

✓ Common Symptoms Fixed

• Oven not heating or completely cold
• Oven bakes unevenly or only from the top
• No bottom heat during bake cycle
• Visible burn marks, cracks, or holes in the element
• Oven takes much longer than normal to preheat
• Food undercooked on the bottom

✓ Key Features & Specifications

• Part Number: WG02F05395
• Wattage: 3000W
• Voltage: 240V
• Appliance Type: Electric Range / Oven
• Position: Bake (bottom) element
• OEM manufacturer: GE Appliances
• Fits: GE 30" electric ranges (see compatible models below)
• Direct OEM replacement — no modifications required

✓ Buying Options

The OEM option is the genuine GE part (WG02F05395), manufactured to the exact specifications of your original element. This is the same part installed at the factory and is the recommended choice when you want a guaranteed fit with no guesswork.

The XPart option is a premium aftermarket bake element engineered to meet or exceed OEM performance specifications. It is designed as a direct drop-in replacement for the WG02F05395 and offers a cost-effective alternative for budget-conscious repairs. XPart aftermarket replacement parts are not affiliated with, sponsored by, or endorsed by GE Appliances or any OEM manufacturer.

✓ Replacement Part Numbers

• WG02F05395 (OEM GE part number)
• WB44T10011 (alternate OEM cross-reference)
• WB44X200 (alternate OEM cross-reference)
• WG02F05395XP (aftermarket cross-reference)

✓ Installation Tips

• Disconnect power at the breaker before starting — this is a 240V circuit.
• Remove the two screws securing the element to the oven back wall.
• Gently pull the element forward to expose the terminal connectors.
• Squeeze the terminal clips and slide them off the old element.
• Connect the terminals to the new element — they are keyed and only fit one way.
• Push the element back, reinstall the screws, and restore power.
• Run a short bake cycle to confirm the element glows red evenly across its full length.

✓ Compatible Models

This bake element is compatible with select GE 30" electric range models. Refer to your model number (found on the oven door frame label) to confirm fit. Contact us if your model is not listed.

• GE EC7666DBFPX0A
• GE FFES3025PSC
• GE FFES3025PSD
• GE FFES3025PSE
• GE FFES3025PSF
• GE FFES3025PSG
• GE FFES3025PSJ
• GE FFES3025PSK
• GE IO930FIX0A
• GE IO930FIX0B

✓ Frequently Asked Questions

How do I know if my bake element is burned out?
Visually inspect the element for cracks, holes, or burn marks. If it looks intact, set the oven to bake and watch — a working element will glow red within 60–90 seconds. No glow means the element has failed. See our Oven Won't Heat guide for a full diagnostic walkthrough.

Will this element fix uneven baking?
If the uneven baking is caused by a partially failed bake element (one section not glowing), yes — replacing it will restore even heat distribution. See our Oven Not Heating Evenly guide for other possible causes.

Is the XPart bake element as good as the OEM?
The XPart element is engineered to meet OEM performance specs and is a direct drop-in replacement. For most residential repair applications, it performs equivalently to the OEM part at a lower price point.

How long does installation take?
Most homeowners complete this repair in 15–30 minutes with a basic screwdriver. No special tools or technical experience required.

Do you ship to my location in Canada?
Yes — XPart Supply ships Canada-wide with fast dispatch. See our contact page for shipping inquiries.