WASHER WILL NOT SPIN OR AGITATE WITH THE LID CLOSED
GE Washer Lid Switch Assembly WG04F01772, Fixes Washer will not spin or agitate with the lid closed
Genuine OEM lid switch assembly for GE top-load washing machines. Detects whether the washer lid is open or closed and prevents spinning and agitation when the lid is open.
Part WG04F01772Replaces WH12X10334GE
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWG04F01772
ReplacesWH12X10334
ManufacturerGE
Appliance TypeWasher
Part TypeWasher Lid Switch Assembly
✅ Cross Reference Information
Current Part NumberWG04F01772
ReplacesWH12X10334
Common Symptoms
- Washer does not start or acts as if the lid is open.
- Washer fills or drains but will not agitate or spin.
- Cycle stops or fails to progress when lid-status detection is not recognized.
- Operation is intermittent or responds only when the lid is pressed or repositioned.
Check Before Replacing
- Unplug the washer before inspecting the switch assembly, wiring, or connector.
- Confirm the lid closes fully and that the lid probe or strike is present, intact, and aligned with the switch area.
- Visually inspect the switch assembly and harness for looseness, damaged insulation, corrosion, or disconnected wiring.
- If qualified to use a multimeter, test the switch for the correct open/closed continuity states with power disconnected and according to the appliance service documentation.
- Do not bypass the lid switch; if the switch tests correctly, investigate the lid strike, alignment, wiring, or control system rather than assuming the switch is defective.
Pro Tip
Check the lid strike and alignment before replacing the assembly; a broken or misaligned strike can produce the same no-spin or no-start symptom as a failed switch.
Part Details
Part NumberWG04F01772
Part TypeWasher Lid Switch Assembly
ManufacturerGE
Appliance TypeWasher
Primary FunctionDetects whether the GE top-load washer lid is open or closed and signals the washer to prevent agitation and spinning when the lid is open.
Installation Notes
- Disconnect electrical power before beginning installation.
- Installation requires access to the lid-switch area and disconnection of the applicable wiring connector or harness.
- Reinstall the assembly securely and ensure the lid strike or probe engages the switch correctly when the lid is closed.
- After installation, verify that the washer recognizes the closed lid and completes an appropriate test or operating cycle.
- If wiring, cabinet access, or electrical testing is unfamiliar, use a qualified appliance technician.
Verified Compatible Models
GBAN2800F0WW, GCAP1800D0WW, GCAP1800D1WW, GMAN2800D0WS, GMAN2800D1WS, GMAN2800D2WS, GMAN4250F1WS, GSSR4170H2WW, GTAN2800D0WW, GTAN2800D1WW, GTAN2800D2WW, GTAN4250D0WW, GTAN4250D1WW, GTAN4250D2WW, GTAN5250D0WW, GCWN4950D2WS, GCWP1800D1WW, GTW180SCJ0WW, GTW180SSJ0WW, MTAP1100F0WW, MTAP1100F1WW, MTAP1100F2WW
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
