AUTOMOTIVE PART
Moog Alignment Shim K100143
Alignment Shim
Part K100143MoogAlignment Shim
Match your exact vehicle configuration to the verified applications below.
Confirm the year, make, model, engine, drivetrain and required position before ordering.
Confirm the year, make, model, engine, drivetrain and required position before ordering.
Is This the Right Part?
Manufacturer Part NumberK100143
ManufacturerMoog
Part TypeAlignment Shim
Part Details
Additional specifications are pending verification.
Verified Vehicle Fitment
Make: Buick, Cadillac, Chevrolet, Chrysler, Ford, Geo, Honda, Hyundai, Kia, Nissan, Oldsmobile, Pontiac, Saturn, Scion, Toyota, Volkswagen
Model: 56 verified models — see exact combinations below.
Years: 1978–2019, 2021–2023 — varies by model and configuration.
Check before ordering: Match the year, make, model, position, and every engine, transmission or other restriction in the same row. Listed years do not apply to every model.
View vehicle applications (100 configuration groups)
| Years | Make | Model | Position | Engine / transmission / notes |
|---|---|---|---|---|
| 1982–1996 | Buick | Century | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Buick | LeSabre | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006–2011 | Buick | Lucerne | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1997–2005 | Buick | Park Avenue | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1989–1991 | Buick | Reatta | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007 | Buick | Rendezvous | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2006 | Buick | Rendezvous | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1978–1993, 1995–1999 | Buick | Riviera | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007 | Buick | Terraza | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Buick | Terraza | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Cadillac | DeVille | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006–2011 | Cadillac | DTS | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1980–1992 | Cadillac | Eldorado | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1980–1992, 1998–2004 | Cadillac | Seville | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1982–1990 | Chevrolet | Celebrity | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1990–1996 | Chevrolet | Lumina APV | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1998–2002 | Chevrolet | Prizm | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2009 | Chevrolet | Uplander | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Chevrolet | Uplander | Rear | Drive Type: FWD; Sub Model: LT; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Chevrolet | Uplander | Rear | Sub Model: Base; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Chevrolet | Uplander | Rear | Sub Model: LS; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1997–2001, 2005 | Chevrolet | Venture | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Chevrolet | Venture | Rear | Drive Type: FWD; Sub Model: LS; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Chevrolet | Venture | Rear | Drive Type: FWD; Sub Model: LT; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2003 | Chevrolet | Venture | Rear | Drive Type: FWD; Sub Model: Warner Bros.; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002 | Chevrolet | Venture | Rear | Sub Model: Base; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Chevrolet | Venture | Rear | Sub Model: Plus; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2003 | Chevrolet | Venture | Rear | Sub Model: Value; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2011–2014 | Chrysler | 200 | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2013 | Ford | Transit Connect | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1989–1997 | Geo | Prizm | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2008 | Honda | Fit | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006–2011 | Hyundai | Accent | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2017 | Hyundai | Veloster | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2013 | Kia | Forte | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2013 | Kia | Forte Koup | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2013 | Kia | Forte5 | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2021–2023 | Kia | Seltos | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2019 | Kia | Soul | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2015–2019 | Kia | Soul EV | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2014 | Nissan | Cube | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2013–2019 | Nissan | Sentra | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2011 | Nissan | Versa | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1995–1999, 2001–2003 | Oldsmobile | Aurora | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1982–1996 | Oldsmobile | Cutlass Ciera | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1987–1994 | Oldsmobile | Cutlass Cruiser | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1990–2001 | Oldsmobile | Silhouette | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Oldsmobile | Silhouette | Rear | Drive Type: FWD; Sub Model: GLS; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Oldsmobile | Silhouette | Rear | Drive Type: FWD; Sub Model: Premiere; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Oldsmobile | Silhouette | Rear | Sub Model: GL; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1979–1992 | Oldsmobile | Toronado | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1982–1991 | Pontiac | 6000 | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2001–2005 | Pontiac | Aztek | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Pontiac | Bonneville | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1999–2001, 2007 | Pontiac | Montana | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005 | Pontiac | Montana | Rear | Drive Type: FWD; Sub Model: SV6; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004, 2006 | Pontiac | Montana | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1990–1999 | Pontiac | Trans Sport | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2008 | Pontiac | Vibe | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Pontiac | Vibe | Rear | Drive Type: FWD; Sub Model: Base; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Pontiac | Vibe | Rear | Sub Model: GT; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2010 | Pontiac | Vibe | Rear | Sub Model: Base; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2010 | Pontiac | Vibe | Rear | Sub Model: GT; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007 | Saturn | Relay | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006 | Saturn | Relay | Rear | Drive Type: FWD; Sub Model: 3; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005 | Saturn | Relay | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006 | Saturn | Relay | Rear | Sub Model: 2; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2015 | Scion | iQ | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2011–2016 | Scion | tC | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2006 | Scion | xA | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2006, 2008–2015 | Scion | xB | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2008–2014 | Scion | xD | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2018 | Toyota | Corolla | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Body Type: Sedan; Sub Model: SE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Body Type: Sedan; Sub Model: XSE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: CE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: L; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: LE Eco; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: LE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: XLE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2008 | Toyota | Corolla | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Toyota | Echo | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2008 | Toyota | Matrix | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: Base; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: XR; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Toyota | Matrix | Rear | Sub Model: XRS; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2013 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: S; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2010 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: XR; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2013 | Toyota | Matrix | Rear | Sub Model: Base; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2013 | Toyota | Matrix | Rear | Sub Model: XRS; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2001–2015 | Toyota | Prius | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2015 | Toyota | Prius Plug-In | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2011 | Toyota | Yaris | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1998–1999 | Volkswagen | Passat | Rear | M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000 | Volkswagen | Passat | Rear | Drive Type: FWD; Sub Model: GLX; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2005 | Volkswagen | Passat | Rear | Sub Model: GL TDI; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2005 | Volkswagen | Passat | Rear | Sub Model: GL; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2005 | Volkswagen | Passat | Rear | Sub Model: GLS TDI; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Volkswagen | Passat | Rear | Sub Model: GLS; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2001–2005 | Volkswagen | Passat | Rear | Sub Model: GLX; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
Source: supplier-verified applications for Moog K100143. A vehicle not listed is not confirmed compatible.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
