Whirlpool Dishwasher Pump and motor assembly W10902372, Fixes Weak or absent spray-arm water circulation
Genuine Whirlpool OEM dishwasher pump and motor assembly. Includes the circulation pump, diverter valve, and lower wash-arm support; does not include the drain pump. It circulates wash water through the spray arms.
Confirm your full appliance model number before ordering.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Dishwasher fills but dishes remain poorly cleaned
- Spray arms do not rotate or receive little water
- Unusual humming, grinding, or stalling during the wash portion of a cycle
- Water leaking near the pump-and-motor area
- Intermittent wash circulation
Check Before Replacing
- After the dishwasher fills, pause the cycle and carefully check whether the spray arms are receiving water; lack of spray does not by itself prove the assembly has failed.
- Confirm the dishwasher has filled to its normal operating level before evaluating wash circulation.
- Inspect and clean the accessible filters, sump area, and spray-arm openings for food debris or obstructions.
- With power disconnected, visually inspect the pump-area wiring connector and accessible hose connections for looseness, damage, or signs of leakage.
- Distinguish circulation symptoms from drain symptoms: this assembly does not include the drain pump, so a dishwasher that drains poorly may require separate drain-system evaluation.
Pro Tip
Part Details
Installation Notes
- Disconnect electrical power and shut off the water supply before servicing the dishwasher.
- Use the model-specific service or installation instructions for access and removal because mounting and connection details can vary by dishwasher model.
- Before removing the old assembly, note the routing and connection locations of the wiring and hoses so the replacement is reconnected in the same configuration.
- After installation, restore utilities and check the first test cycle for proper spray circulation and leaks.
- Do not treat a drain-pump fault as resolved by replacing this assembly; the drain pump is a separate component.
Verified Compatible Models
2214715N710, 66514703N512, 66514712N710, 66514713N710, 66514715N710, 66514719N710, 66514752N511, 66514752N512, 66514753N511, 66514753N512, 66514754N511, 66514754N512, 66514759N511, 66514759N512, KDTE254EBL1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
