Kenmore Dishwasher Model 2214715N710 Parts
MODEL PARTS & REPAIR GUIDE
Kenmore 2214715N710 Dishwasher Parts & Repair Guide
Find replacement parts for the Kenmore Dishwasher 2214715N710, including controls, pump and motor components, rack hardware, seals, a drain hose extension, and water-inlet parts.
🇨🇦 Canadian Business Since 1996
⭐ 30 Years of Appliance Experience
🚚 Fast Shipping Across North America
✓ Wrong Part Protection
MODEL
2214715N710Kenmore Dishwasher
6 verified XPart product pages linked for this exact model.
Need help choosing the right part?
Not sure which part you need? Compare the part number on your original component and send XPart Supply your full model number 2214715N710 and symptoms for fit help.
Find a Part by Symptom
These symptom links come only from research attached to the currently verified parts. A symptom can have more than one cause.
A leaking, damaged, or incorrectly routed extension can cause water leakage or incomplete dishwasher draining.Water leaking beneath the sink or dishwasher during drainingWeak or absent spray-arm water circulation.Dishwasher fills but dishes remain poorly cleanedUpper dishrack does not slide smoothly.Upper rack binds, catches, or moves unevenly.
Replacement Parts for Kenmore 2214715N710
Every product link below is checked against XPart's verified model-compatibility data and the live Shopify product page before this hub is built.
Controls & Electronics (1)
Pumps & Water Circulation (2)
3385556
Extends the dishwasher drain path up to 12 feet so wastewater can reach a sink, waste tee, garbage-disposer inlet, or other approved household drain connection.
W10902372
Circulates wash water through the dishwasher spray arms during wash and rinse cycles; the assembly includes the circulation pump, diverter valve, and lower wash-arm support, but not the drain pump.
Racks & Baskets (2)
W11259785
Supports and guides the dishwasher’s upper dishrack on the left side so it moves smoothly into and out of the tub.
Seals & Gaskets (1)
Kenmore 2214715N710 Compatibility
This guide is specifically for Kenmore Dishwasher model 2214715N710. Only XPart product pages backed by verified model compatibility are linked here. Always compare the complete appliance model number and replacement part number before ordering.
Before You Order
- Confirm the complete appliance model number from the model/serial label.
- Compare the original component part number when it is visible.
- Review replacement or supersession information on the linked XPart product page.
- If diagnosis is uncertain, contact XPart Supply before ordering.
Frequently Asked Questions
What part helps circulate wash water through the spray arms?
The W10902372 pump and motor assembly circulates wash water through the spray arms during wash and rinse cycles. It includes the circulation pump, diverter valve, and lower wash-arm support, but not the drain pump.
What can cause the upper dishrack to move unevenly?
A damaged or loose W11259785 left-hand upper dishrack slide track can cause the rack to bind, catch, wobble, become crooked, sag, or detach on the left side.
What is the 3385556 drain hose extension used for?
The 3385556 extension lengthens the dishwasher drain path up to 12 feet so wastewater can reach an approved household drain connection, such as a sink, waste tee, or garbage-disposer inlet.
Has the W10195037 overfill-switch lever been superseded?
Yes. The verified supersession identifies WPW10195037 as the successor to W10195037. The successor is not included as a verified linked part for this hub.
- Choosing a selection results in a full page refresh.
