Whirlpool Dishwasher Pump and motor assembly W10902372, Replaces W10850357, W11049649, W11174868

Genuine Whirlpool OEM dishwasher pump and motor assembly. Includes the circulation pump, diverter valve, and lower wash-arm support; does not include the drain pump. It circulates wash water through the spray arms.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher fills but dishes remain poorly cleaned
• Spray arms do not rotate or receive little water
• Unusual humming, grinding, or stalling during the wash portion of a cycle
• Water leaking near the pump-and-motor area
• Intermittent wash circulation

Check Before Replacing

• After the dishwasher fills, pause the cycle and carefully check whether the spray arms are receiving water; lack of spray does not by itself prove the assembly has failed.
• Confirm the dishwasher has filled to its normal operating level before evaluating wash circulation.
• Inspect and clean the accessible filters, sump area, and spray-arm openings for food debris or obstructions.
• With power disconnected, visually inspect the pump-area wiring connector and accessible hose connections for looseness, damage, or signs of leakage.
• Distinguish circulation symptoms from drain symptoms: this assembly does not include the drain pump, so a dishwasher that drains poorly may require separate drain-system evaluation.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM dishwasher pump-and-motor assembly
• Includes circulation pump
• Includes diverter valve
• Includes lower wash-arm support
• Does not include the drain pump
• Moves water from the sump area through the spray arms

Installation Notes

• Disconnect electrical power and shut off the water supply before servicing the dishwasher.
• Use the model-specific service or installation instructions for access and removal because mounting and connection details can vary by dishwasher model.
• Before removing the old assembly, note the routing and connection locations of the wiring and hoses so the replacement is reconnected in the same configuration.
• After installation, restore utilities and check the first test cycle for proper spray circulation and leaks.
• Do not treat a drain-pump fault as resolved by replacing this assembly; the drain pump is a separate component.

Verified Compatible Models

2214715N710, 66514703N512, 66514712N710, 66514713N710, 66514715N710, 66514719N710, 66514752N511, 66514752N512, 66514753N511, 66514753N512, 66514754N511, 66514754N512, 66514759N511, 66514759N512, KDTE254EBL1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.