Whirlpool Range Knob bezel / bezel-knob W11317889, Replaces W11090284

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible cracking, wear, deformation, or a missing bezel around the control knob.
• The control knob appears loose or does not sit securely against the control panel.
• Loss of the finished trim surrounding the knob opening.

Check Before Replacing

• With the appliance off and the cooking surface cool, visually inspect the bezel around the affected knob for cracks, distortion, looseness, or missing pieces.
• Confirm the control knob is fully seated and aligned; compare its fit and surrounding bezel condition with an unaffected compatible control, if available.
• If inspection requires knob removal, pull the knob straight away from the control panel only; do not pry against the panel or force parts that do not release normally.
• If the knob remains loose after the bezel is inspected, also inspect the knob and its shaft interface; this bezel alone may not correct a damaged knob or control shaft.

Pro Tip

Part Details

Installation Notes

• Turn the affected control to OFF and allow the appliance and surrounding panel area to cool before handling.
• Remove the control knob by pulling it straight away from the control panel; avoid prying or forcing against the panel.
• Position the replacement bezel in the same orientation as the original, then reinstall the knob fully and verify that OFF aligns correctly before operating the appliance.
• Do not use the appliance if a control will not return to OFF, if a gas odor is present, or if the control assembly is damaged; seek qualified service.

Verified Compatible Models

JDRP436HM01, JDRP536HM00, JDRP536HM01, JDRP636HM00, JDSP548HM00, JDSP548HM01, JGCP430HM00, JGCP436HM00, JGCP536HM00, JGCP548HM00, JGCP636HM00, JGCP648HM00, JGCP748HM00, JGRP536HM00, JGRP748HM05

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.