JennAir Range Model JDRP436HM01 Parts
MODEL PARTS & REPAIR GUIDE
JennAir JDRP436HM01 Range Parts & Repair Guide
Find replacement parts for the JennAir JDRP436HM01 range, including bake, surface-burner, ignition, control, hinge, and door components listed for this model.
🇨🇦 Canadian Business Since 1996
⭐ 30 Years of Appliance Experience
🚚 Fast Shipping Across North America
✓ Wrong Part Protection
MODEL
JDRP436HM01JennAir Range
10 verified XPart product pages linked for this exact model.
Need help choosing the right part?
Not sure which part you need? Compare the part number on your original component and send XPart Supply your full model number JDRP436HM01 and symptoms for fit help.
Find a Part by Symptom
These symptom links come only from research attached to the currently verified parts. A symptom can have more than one cause.
Little or no heat during baking.Bake cycle does not produce normal heat.Cracked, worn, or missing control-knob bezel.Visible cracking, wear, deformation, or a missing bezel around the control knob.One surface burner has an uneven, weak, delayed, or irregular flame despite an open gas supply and usable igniter.Uneven flame pattern around the burnerSurface burners produce weak, intermittent, or no spark.One or more surface burners are difficult or unable to ignite.Affected surface burner does not ignite.No spark at one surface burner while other burners spark normally
Replacement Parts for JennAir JDRP436HM01
Every product link below is checked against XPart's verified model-compatibility data and the live Shopify product page before this hub is built.
Controls & Electronics (1)
Door & Hardware (1)
W11317948
Drying & Ventilation (1)
Heating & Sensors (1)
W10860270
Provides the lower-oven heat used during Bake cycles.
Replacement Parts (6)
W11317889
Forms the trim bezel around the compatible range or cooktop control knob at the control panel.
W11319673
Supports and distributes gas from the surface-burner injector so the gas surface burner can produce an even cooking flame beneath the burner cap.
W11319687
Generates and distributes high-voltage ignition power to the surface-burner spark electrodes on compatible gas ranges.
W11573760
Generates the ignition spark for a gas range surface burner.
W11580024
Carries the high-voltage ignition pulse from the spark module to the surface spark electrode so the selected gas burner can ignite.
JennAir JDRP436HM01 Compatibility
This guide is specifically for JennAir Range model JDRP436HM01. Only XPart product pages backed by verified model compatibility are linked here. Always compare the complete appliance model number and replacement part number before ordering.
Before You Order
- Confirm the complete appliance model number from the model/serial label.
- Compare the original component part number when it is visible.
- Review replacement or supersession information on the linked XPart product page.
- If diagnosis is uncertain, contact XPart Supply before ordering.
Frequently Asked Questions
Which part provides lower-oven heat during Bake cycles?
Bake Element W10860270 provides the lower-oven heat used during Bake cycles. Verified symptoms include little or no baking heat, failure to reach baking temperature, uneven baking, or a visibly damaged exposed lower element.
Which parts are related to surface-burner ignition?
Verified ignition-related parts include Range Spark Module W11319687, Surface burner igniter W11573760, and Surface spark electrode / igniter-int wire W11580024.
Which part supports an uneven or irregular surface-burner flame?
Surface Burner Base W11319673 supports and distributes gas from the surface-burner injector. Verified symptoms include an uneven, weak, delayed, yellow, noisy, lifting, or unstable flame localized to one burner.
Are control and door components included?
Yes. The verified linked parts include Range/cooktop control knob W11317537, knob bezel W11317889, HINGE-RECV W11317948, and Door Liner W11334152.
- Choosing a selection results in a full page refresh.
