Whirlpool Range High-flame surface burner base / burner head (flame spreader) W11319683, Replaces W10891987

Genuine Whirlpool gas-cooking-surface component identified by distributor catalogs as a high-flame “Spreader, flame” and categorized as a surface burner base; other OEM-part catalogs call it a burner head. It distributes gas at the surface burner for a stable cooking flame.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Localized hot spots or uneven heating across the cookware
• Inconsistent flame distribution around the burner
• Reduced or uneven cooking heat from the affected burner
• Abnormal air-flow or burner noise if the burner head’s internal separator is damaged or missing

Check Before Replacing

• Turn the burner control off and allow the burner to cool completely before inspection.
• Verify that the burner head is the correct size for the burner and is seated flat and fully on its support.
• Check that the burner-head opening/notch is aligned with the igniter electrode or the applicable burner alignment feature.
• Inspect the burner head and flame ports for visible cracks, deformation, blockage, or damage; do not enlarge ports or use sharp objects to clear them.
• Compare the affected burner’s flame pattern with another burner of the same type after the burner is correctly assembled and dry.
• If the burner head was separated for cleaning, verify that all intended pieces are present and properly reassembled; do not operate the burner if a damaged internal separator causes abnormal airflow or noise.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool burner head / surface burner base
• High-flame spreader design
• Supports even gas distribution and stable combustion
• Used with compatible Whirlpool-family gas ranges and cooktops
• Replaces Whirlpool part W10891987

Installation Notes

• Turn off the burner and allow all components to cool before handling.
• Place the burner head on the correct burner support and match the burner-head size to the intended cap.
• Align the burner-head opening or notch with the igniter electrode or the corresponding burner alignment feature.
• Install the burner cap in its correct position and verify that the assembly sits level before operation.
• Do not operate the burner if the head is cracked, visibly damaged, incomplete, or cannot be seated correctly.

Verified Compatible Models

JDRP430HL00, JDRP430HL01, JDRP430HM01, JDRP436HL00, JDRP436HL01, JDRP436HM00, JDRP436HM01, JDRP536HL00, JDRP536HL01, JDRP548HL00, JDRP548HM00, JDRP636HM01, JDRP648HL01, JDRP648HM00, JDRP748HM00, JDRP748HM01, JDRP848HM01, JDSP536HL00, JDSP536HL01, JDSP536HM00, JDSP536HM01, JGCP536HL00, JGCP648HL00, JGRP430HL00, JGRP430HL01, JGRP430HL05, JGRP436HL05, JGRP436HM00, JGRP436HM05, JGRP536HL00, JGRP536HL01, JGRP536HM00, JGRP536HM01, JGRP548HL00, JGRP548HL05, JGRP548HM01, JGRP548HM05, JGRP636HL00, JGRP636HL01, JGRP636HL05, JGRP636HM05, JGRP648HL00, JGRP648HL05, JGRP648HM00, JGRP648HM05, JGRP748HL00, JGRP748HL05, JGRP748HM00, JGRP748HM05

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.