Whirlpool Range/Stove/Oven Range Spark Module W11319687, Replaces W11121317

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• One or more surface burners are difficult or unable to ignite.
• Burner clicking or sparking is intermittent.
• All surface burners fail to spark when a knob is turned to Lite.
• Surface burners continue clicking or sparking after ignition or when the controls are turned off.

Check Before Replacing

• With the appliance controls off, confirm the range has electrical power and that the circuit breaker or fuse has not tripped.
• When a surface-burner knob is turned to Lite, observe whether the electrodes produce a visible spark at the affected burner(s).
• Compare the affected burner with a working burner: inspect the electrode and visible spark-wire connection for damage, looseness, contamination, or moisture.
• If the electrode and spark wire appear intact, have a qualified technician test the spark-module circuit and supply voltage; do not perform energized measurements unless properly trained.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power to the range before accessing or replacing the spark module.
• Allow the appliance to cool and follow the appliance-specific service literature for access and wire-connection details.
• Transfer or reconnect wiring only according to the appliance wiring diagram; incorrect connections can damage the ignition system.
• After installation, restore power and verify that the surface burners spark and ignite normally. If testing reveals gas leakage or abnormal continuous sparking, stop use and contact a qualified technician.

Verified Compatible Models

BDR90ARNNA00, JDRP430HL01, JDRP436HL01, JDRP436HM01, JDRP548HL00, JDRP548HM01, JDRP636HL01, JDRP636HM00, JDRP648HM01, JDRP748HM01, JDRP848HL00, JDRP848HM01, JDSP536HL00, JDSP548HL00, JDSP548HM01

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.