GE Dryer Squealing or Drum Grinding? Drum Glide WG04L00096 – Fix Drum Noise Fast

If your GE dryer is making a loud squealing, grinding, or scraping noise during the drying cycle, worn drum glides are the most common cause. In most GE electric dryers, the drum glides are low-friction polymer pads mounted to the front bulkhead that support the drum lip as it rotates. When they wear through from heat and constant friction, the metal drum lip contacts the bulkhead directly, producing squealing, grinding, and increased vibration with every rotation. ⚡ High-wear consumable on GE and Hotpoint electric dryer platforms. Part WG04L00096 is the genuine OEM replacement glide — and our XPart alternative (DE504) delivers the same low-friction polymer spec at a lower price point — that restores smooth, quiet drum rotation immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Dryer powers on, heats, and tumbles normally
• ✔ Drive belt and motor confirmed intact and functional
• ✔ Drum top bearing confirmed OK (noise isolated to front drum lip area)
• ✔ No error codes or electrical faults present
• ✔ ONLY problem is squealing, grinding, scraping, or drum wobble during tumble

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Loud squealing or scraping noise during the drying cycle — most common complaint
• Grinding sound from the front of the drum during tumble
• Drum wobbles or feels rough when rotated by hand with the door open
• Increased vibration or thumping that worsens as the dryer heats up
• Visible wear marks or scoring on the drum front lip or bulkhead surface
• Noise that started gradually and has worsened over several months

✔ If these symptoms match, the drum glides are the most likely failed component in the system.

✔ In most cases, replacing the drum glides restores smooth, quiet drum rotation immediately.

📦 Part Details

• Part Number: WG04L00096
• Type: Dryer drum front glide — low-friction polymer bearing pad, sold individually (most GE dryers require 2)
• Replaces: OEM direct-fit drum glide — supersedes WE1M504, WE03X37318 (no modification required)
• Brands: GE, Hotpoint, and compatible electric dryers

⚙️ Installation Notes

Skill Level: Moderate — 30–45 minutes. Unplug the dryer before beginning. Remove the front panel to access the drum and front bulkhead. Slide the drum forward to expose the glide mounting points on the bulkhead, remove the worn glides, and clean the surface of any debris or lint. Press the new glides firmly into position, reassemble the front panel, restore power, and run a short cycle to confirm quiet, smooth drum rotation. No torque spec required — glides press-fit into the bulkhead slots.

✓ Compatible Models

Confirmed compatible with GTMX100ED0WW, GTMX100ED1WW, GTMX100ED2WW, GTMX100ED3WW, GTMX100EM0WW, GTMX100EM1WW, GTMX100EM2WW, GTMX180ED0WW, GTMX180ED1WW, GTMX180ED2WW, GTMX180ED3WW, GTMX180ED6WW, GTMX180GD0WW, GTMX180GD1WW, GTMX180GD2WW, GTMX180GD3WW, GTMP520ED0WW, GTMP520ED2WW, GTMP520ED3WW, GTMP520GD0WW, GTMP520GD1WW, GTMP520GD2WW, GTMP520GD3WW, GTMP280ED0WW, GTMP280ED1WW, GTMP280ED3WW, GTMP280GD0WW, GTMP280GD1WW, GTMP280GD3WW, GTMP200EM0WW, GTMP200EM2WW, GTMS570ED1WW, GTMS570ED2WW, GTMS570ED3WW, GTMN500EM0WS, GTMN500EM2WS, GTMN280EF0WW, GTMN280EF1WW, GFMN100EL0WW, GFMN240EL0WW, GFMN240GL0WW, GFMN245EL0MS, GFMN245GL0MS, GFMS350GL0WW, GFMS355EL0MS, GFMS355EL1MV, GFMS355GL0MS, GCMX180ED0WW, GCMX180ED2WW, GCMX180ED3WW, GMMP280ED0WS, GMMP280ED1WS, GMMP280ED2WS, GMMP280ED3WS, GMMP300EM1WS, GTAN5050M0WS, GTW860SPJ1MC, GTS12BAMALWW, GTS16GBBHRWW, GTS18GBEMRWW, GTR12BAXBB, GTR12BAXLWW, GUSR465EB9WW, GUAP270EM0WW, GUAN275ED0WW, GTUP270GM0WW, UPVH880EJ0MG, UPSE810EH7WT, PTMX910EMWW0, PTMP920EMWS0, PTMN945GMGG0, PCVH680EJ0MR, PCGS920SEF1SS, PBXR473EH7WW, PDSR405EH7WW, PDSR483EH7WW, PEM31BMC01, JCAS724H1WW, JP3536SJ1SS, MCB787DR2WW, MTMX050EF5WW, GTMX180ED6WW, PCB900DR2WW, PCB969DR2BB, JCB530DF1WW, JCB630SF2SS, JCBP240DT1WW, JCBP240DT3WW, JCBP270DT1WW, JCBP350DT2WW, JCBP630ST1SS, JCBP81SP1SS, JCBP81DP2WW, JCBP84DPBB, JCBP840DT1WW, JCBS660DF1WW, JCGB660DEJ2WW, JCGBS60DEK1BB, JCB860SJ1SS, JCSP42DR4WW, JCB635DJ1BB, JCB730SF1SS, GDT720SSF4SS, ZDT870SSF7SS, ZBD0710K10SS, plus additional GE and Hotpoint dryer models. Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages