OVEN DOES NOT HEAT BECAUSE THE IGNITER IS WEAK OR FAILS TO IGNITE THE GAS
Whirlpool Range oven bake/broil igniter, horizontal mount with wire connector WP7432P136-60, Fixes Oven does not heat because the igniter is weak or fails to ignite the gas
OEM gas-range oven bake/broil igniter. Horizontal-mount design with wire connector; may be used for either the bake or broil burner. Whirlpool parts documentation identifies it as an oven bake/broil igniter.
Part WP7432P136-60Replaces 7432P136-60, 7432P131-60, 74008064, 32009801, 31991701Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWP7432P136-60
Replaces7432P136-60, 7432P131-60, 74008064, 32009801, 31991701
ManufacturerWhirlpool
Appliance TypeRange
Part TypeRange oven bake/broil igniter, horizontal mount with wire connector
✅ Cross Reference Information
Current Part NumberWP7432P136-60
Replaces7432P136-60, 7432P131-60, 74008064, 32009801, 31991701
Common Symptoms
- Little or no heat during baking
- Igniter glows but the gas does not ignite
- Igniter does not glow
- Oven will not start or heat
- Element will not heat
Check Before Replacing
- With the oven controls off and the appliance safe to observe, watch whether the igniter glows during a bake or broil call.
- If the igniter glows for more than about 90 seconds without ignition, the igniter may be too weak to open the safety valve; do not assume this is the only possible cause.
- If the igniter does not glow, power must be disconnected before checking the igniter circuit and continuity with an appropriate meter; electrical testing should be performed only by someone qualified to do so.
- If gas is smelled without ignition, turn the oven off, ventilate the area, avoid flames or sparks, and arrange qualified service rather than repeatedly attempting ignition.
Pro Tip
A visibly glowing igniter can still be electrically weak: delayed or absent ignition after prolonged glowing is a useful indication that the igniter may not be drawing enough current to open the safety valve.
Part Details
Part NumberWP7432P136-60
Part TypeRange oven bake/broil igniter, horizontal mount with wire connector
ManufacturerWhirlpool
Appliance TypeRange
Primary FunctionHeats electrically to ignite the gas oven burner and draw sufficient current to open the oven safety valve; this horizontal-mount igniter can serve the bake or broil burner.
Installation Notes
- Disconnect electrical power and shut off the range gas supply before service.
- Allow the oven and igniter to cool before handling.
- Use the appliance-specific service instructions to access the burner and igniter; mounting and access arrangements can vary by model.
- Handle the igniter element carefully because it is fragile, and do not touch the central element unnecessarily.
- Reconnect the wire connector securely and verify that wiring is not pinched or contacting hot surfaces before reassembling.
- After installation, restore utilities and check operation according to the appliance service instructions; if gas odor or ignition failure remains, stop and obtain qualified service.
Verified Compatible Models
ACF3315AK, ACF3315AK-PACF3315AK2, ACF3315AT, ACF3325AB, ACF3325AC, ACF3325AS, ACF3325AW-PACF3325AW0, ACF3375AC-PACF3375AC1, AGR5725RDB16, AGR5725RDQ16, AGR5725RDS, AGR5735QDW, MGR5765QDQ, MGR5765QDS, PGR5750LDQ
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
