Menu
GE Oven Not Heating Evenly? Burner Head WS01L18632 – Fix Weak or Uneven Flame Fast
A failed oven burner head is one of the most common causes of uneven baking, weak flame output, or a burner that won't light in GE gas ranges. In most GE gas ovens, the burner head distributes the gas flame evenly across the oven cavity floor. When it fails, you'll notice uneven cooking temperatures, a burner that ignites poorly, or a flame that burns only on one side. ⚡ Common failure point in GE-built gas ranges and ovens. Part WS01L18632 is the genuine OEM replacement that restores proper flame distribution and even oven heating.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your oven powers on and the igniter sparks normally
- ✔ The gas supply to the range is confirmed on and flowing
- ✔ Surface burners (if applicable) work correctly
- ✔ ONLY problem is weak, uneven, or absent oven burner flame
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Oven flame burns unevenly or only on one side
- Oven takes much longer than normal to preheat
- Burner ignites but flame is very low or sputters out
- Baked goods are undercooked on one side or bottom
- Visible cracks, warping, or carbon buildup on the burner head
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this burner head restores normal oven operation immediately.
📦 Part Details
- Part Number: WS01L18632
- Type: Gas Oven Burner Head — OEM GE replacement
- Brands: GE, Hotpoint, Café
⚠️ Recommended While Repairing:
While the oven is open, inspect the oven igniter — if it glows orange instead of bright white or takes more than 90 seconds to light, it's weak and should be replaced at the same time. Replacing both together saves a second service call and ensures reliable ignition with the new burner head.
While the oven is open, inspect the oven igniter — if it glows orange instead of bright white or takes more than 90 seconds to light, it's weak and should be replaced at the same time. Replacing both together saves a second service call and ensures reliable ignition with the new burner head.
⚙️ Installation
Skill Level: Moderate — 30–45 minutes. Disconnect power and shut off the gas supply before servicing. Remove the oven bottom panel to access the burner assembly, disconnect the old burner head, and install the new WS01L18632 in reverse order. Restore gas and power, then test ignition before reassembling the oven floor panel.
✓ Compatible Models
Confirmed compatible with select GE, Hotpoint, and Café gas range and oven models. Contact us to verify your model number before ordering.
💡 Pro Tip
Check the Igniter Before You Order:
If your oven flame is weak or slow to light, the igniter is often the first thing to fail — not the burner head. A healthy igniter glows bright white and lights the burner within 30–60 seconds. If yours glows dim orange or takes longer, replace the igniter alongside this burner head. Doing both at once eliminates the most common causes of poor oven heating in a single repair.
If your oven flame is weak or slow to light, the igniter is often the first thing to fail — not the burner head. A healthy igniter glows bright white and lights the burner within 30–60 seconds. If yours glows dim orange or takes longer, replace the igniter alongside this burner head. Doing both at once eliminates the most common causes of poor oven heating in a single repair.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
