The WW01F01682 is a genuine OEM suspension rod and spring assembly for GE and Hotpoint top-load washers. This component is part of the four-rod suspension system that supports and dampens the wash tub during agitation and spin cycles. Each rod connects the outer tub to the washer cabinet frame via a spring and plastic mounting cup. When one or more rods wear out, break, or lose spring tension, the tub swings freely and causes violent shaking, loud banging, or the washer walking across the floor. Sold individually — most repairs require replacing all four rods at once for balanced suspension.

✓ Model-Specific Repair Pages

Don’t see your model? Contact us — we carry parts for hundreds of GE washer models.

✓ Common Symptoms Fixed

• Washer shaking violently during agitation or spin
• Loud banging or thumping noises during the wash cycle
• Washer walking or moving across the floor
• Tub hitting the cabinet walls during spin
• Unbalanced loads that won’t resolve even after redistributing clothes
• Visible broken or detached suspension rod

✓ Key Features & Specifications

• Genuine OEM GE part — exact factory replacement
• Part of the four-rod tub suspension system in top-load washers
• Includes rod, coil spring, and upper/lower mounting cups
• Sold individually — replace all four rods for balanced suspension
• Direct plug-in replacement — no tools required for installation
• Part Number: WW01F01682 | Replaces: 233D2080G002

✓ Buying Options

OEM / New: The WW01F01682 is the genuine GE OEM suspension rod and spring assembly — the same part your washer was originally built with. For best results, replace all four suspension rods at the same time to restore balanced tub support and prevent recurring vibration issues.

✓ Replacement Part Numbers

WW01F01682 | 233D2080G002

✓ Installation Tips

CRITICAL SAFETY WARNING: Always unplug your washer before servicing.

1. Unplug the washer from the wall outlet.
2. Open the washer lid and locate the four suspension rods connecting the tub to the cabinet corners.
3. Inspect all four rods — look for broken springs, cracked cups, or rods that have popped out of their mounting points.
4. Lift the outer tub slightly to release tension and pop the upper mounting cup out of the cabinet hook.
5. Remove the old rod by disengaging the lower cup from the tub bracket.
6. Install the new WW01F01682 rod by seating the lower cup on the tub bracket first, then hooking the upper cup into the cabinet.
7. Repeat for all four rods if replacing the full set.
8. Plug in the washer and run a spin cycle to verify smooth, balanced operation.

Tech Notes: Always replace all four suspension rods as a set — if one has failed, the others are likely worn and will cause the same issue shortly. Inspect the plastic mounting cups for cracks; a broken cup will prevent the rod from seating properly even if the rod itself is intact.

✓ Compatible Models

Fits select GE and Hotpoint top-load washers. Verify by your full model number before ordering. Confirmed compatible models include:

GTW220BMK0WW, GTW220BMK1WW, GTW330BMK0WW, GTW330BMK1WW, MTW200BMK0WW

✓ Frequently Asked Questions

Q: My GE washer is shaking violently — is this the right part?
A: Yes — violent shaking during spin is the classic symptom of worn or broken suspension rods. See our guide: washer shaking violently. Inspect all four rods and replace any that are broken, detached, or have cracked cups.

Q: Do I need to replace all four rods or just the broken one?
A: We strongly recommend replacing all four at the same time. The rods wear together, and replacing only one will result in uneven suspension and the same vibration problem returning quickly.

Q: What does WW01F01682 replace?
A: WW01F01682 directly replaces 233D2080G002. Both are functionally identical.

Q: Can I install this myself?
A: Yes — this is one of the easiest washer repairs. No tools are required; the rods simply snap into place. The full set of four can be replaced in under 15 minutes.

Q: Do you ship to Canada?
A: Yes — XPart Supply is based in Canada and ships fast across Canada and the US. See our GE washer parts Canada page for more information.