GE Washer Agitator Sub-Assembly Kit — Restores Wash Action WW03A00272, Replaces 233D3127G001

Is This the Right Part?

✅ Cross Reference Information

233D3127G001

Common Symptoms

• Agitator not moving or spinning
• Slipping or skipping during wash cycles
• Excessive noise or grinding from agitator
• Off-balance loads or poor cleaning performance
• Stripped splines or cracked hub
• Agitator “freewheels” or feels loose

Pro Tip

Part Details

Installation Notes

• CRITICAL SAFETY WARNING:
• Unplug washer before repair.
• Unplug washer
• from wall outlet.
• Remove top panel and agitator cap
• to access mounting bolt.
• Unscrew and remove agitator bolt
• (retain for reinstallation).
• Lift out main agitator
• to expose subwasher/hub assembly.
• Remove old subwasher/hub
• (may require gentle prying).
• Clean splines and mounting area
• of debris and residue.
• Install new subwasher/hub
• from kit, ensuring correct orientation and full engagement on shaft.
• Reinstall main agitator
• and secure with mounting bolt.
• Replace agitator cap and top panel.
• Plug in washer
• and run a wash cycle to verify proper agitation and noise-free operation.
• Safety Notes:
• Inspect agitator and drive shaft for wear or damage—replace if necessary.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.