Appliance Hinge or Bearing Squeaking? XPart Heat Proof Grease 3155 – Fix Seized & Noisy Components Fast

Squeaking, grinding, or seized appliance hinges and bearings are almost always caused by dried-out or heat-degraded lubricant. In most ovens, dryers, and high-heat appliances, standard greases burn off under sustained thermal cycling. When they fail, hinge pins seize, bearings grind, and components wear prematurely — turning a simple lubrication job into a costly part replacement. ⚡ Common failure point in all major brand appliances with high-heat pivot points and bearing surfaces. Part 3155 is the genuine XPart high-temperature formula engineered to stay in place and keep lubricating through extreme heat cycles — preventing seizure and extending component life.

❓ Is This the Right Lubricant?

This is the correct fix if ALL of the following are true:

• ✔ Appliance powers on and runs normally
• ✔ All other functions work correctly
• ✔ Electrical and mechanical supply confirmed OK
• ✔ ONLY problem is squeaking, grinding, stiffness, or seizure at a hinge, bearing, or pivot point

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Oven door squeaking, grinding, or stiff when opening and closing
• Hinge pins dry, corroded, or visibly worn
• Dryer drum bearing making noise after a repair
• Component seizing or binding after high-heat exposure
• Previous lubricant burned off, turned black, or crusted over

✔ If these symptoms match, this is the most likely cause of the problem in the system.

✔ In most cases, cleaning and re-greasing with the 3155 formula restores smooth, quiet operation immediately.

📦 Part Details

• Part Number: 3155
• Also Known As: XP3155, XPart 3155, Heat Proof Grease 3155
• Size: 2oz (57g)
• Type: High-temperature heat proof grease — engineered for sustained thermal cycling
• Formula: Resists breakdown, carbonization, and runoff under extreme heat
• Adhesion: Stays in place on vertical and angled surfaces — does not run or drip when hot
• Applications: Oven hinges, range bearings, dryer drum bearings, dishwasher door springs, microwave door latches, appliance pivot points
• Brands: Whirlpool, GE, Frigidaire, Samsung, LG, Maytag, Bosch, KitchenAid, Electrolux, Kenmore and all major appliance brands

⚙️ Application Instructions

Skill Level: EASY — 5 to 10 minutes. Disconnect power before servicing any appliance component. Clean old grease and debris from the surface, apply a thin even coat of 3155 grease to the pivot point or bearing surface, then work the component through its full range of motion to distribute evenly. Avoid over-application — excess grease attracts dust and can carbonize at high temperatures.

✓ Compatible Applications

Confirmed compatible with oven door hinges (all major brands), range burner bearing assemblies, dryer drum rear bearing surfaces, dishwasher door springs and hinges, microwave door latches, and general high-temperature appliance pivot points. Contact us to verify your model number before ordering.

💡 Pro Tip