Always measure your existing drip pan before ordering a replacement. Drip pan dimensions vary by burner size (6-inch, 8-inch, etc.). Measure the diameter of your existing drip pan to verify the 316048413 dimensions (8 inches / approximately 10 inches at widest point) match your cooktop. An incorrectly sized drip pan will not fit properly and may cause safety hazards.
Clean the cooktop opening before installing the new drip pan. Food debris, grease, or buildup in the cooktop opening can prevent proper drip pan seating and cause the drip pan to sit unevenly. Clean the opening thoroughly with a damp cloth or mild degreaser before installing the new drip pan.This drip pan is burner-size-specific. The 316048413 is designed for 8-inch large burner positions on Frigidaire and affiliated brand ranges. Always verify your burner size matches before ordering. Using an incorrect drip pan size can result in non-fit or improper element operation.
This is a complete replacement drip pan. The 316048413 includes the full chrome-plated galvanized steel drip pan with center hole and support tabs pre-formed and ready for installation. You cannot repair individual components—the entire drip pan must be replaced if damaged.
Drip pan replacement is a simple repair. This repair requires no tools and minimal mechanical skill. The drip pan simply lifts out of the cooktop opening and the new drip pan drops in. Installation typically takes less than 5 minutes per drip pan.
Replace drip pans in sets for uniform appearance. If one drip pan is heavily discolored or damaged, other drip pans of similar age may also be worn. Consider replacing all drip pans at once to maintain a uniform, clean cooktop appearance.
Clean drip pans regularly to extend their life. Food spills and grease buildup on drip pans can cause staining, smoking, and premature deterioration. Wipe up spills promptly and wash drip pans regularly with warm soapy water to extend their life.This repair restores cooktop appearance and safety. A properly functioning drip pan catches food spills, reflects heat efficiently, and maintains a clean cooktop appearance. Replacing damaged drip pans restores both function and aesthetics.
Check the surface element for wear. If the drip pan is heavily damaged, inspect the surface element for signs of wear or damage. Replace the element if it shows visible breaks, blisters, or gaps.
Verify the drip pan sits level before operating the element. An unlevel drip pan can cause the surface element to sit unevenly, leading to poor heating performance or element damage. Ensure the drip pan is properly seated in the cooktop opening.
The chrome plating is heat-resistant but not indestructible. Repeated exposure to extreme temperatures (above 650°F) or harsh chemical cleaners can deteriorate the chrome plating over time. Use mild cleaners and avoid abrasive scrubbing.
Never use abrasive cleaners on chrome-plated drip pans. Steel wool, abrasive pads, or harsh chemical cleaners can scratch or damage the chrome plating. Use only mild dish soap and a soft cloth or sponge to clean drip pans.
The drip pan should not contact the surface element coil. There should be clearance between the drip pan and the element coil to allow proper heat circulation and prevent damage to the drip pan. Ensure the element is properly seated on the support tabs.
This repair is cost-effective compared to range replacement. The cost of drip pan replacement ($20-40 per pan) is far less than the cost of a new range ($800-2,000+). Replace damaged drip pans promptly to maintain safe cooktop operation and appearance.
Verify the terminal block receptacle is accessible through the center hole. The drip pan's center hole must align with the terminal block receptacle to allow proper element connection. Ensure the drip pan is positioned correctly.
Drip pans are not interchangeable between burner sizes. The 8-inch drip pan (316048413) is designed specifically for 8-inch burner positions. Do not attempt to use it with 6-inch burners—it will not fit properly and may cause safety hazards.
Monitor the drip pan after first use. After installing the new drip pan, use the burner at normal operating temperatures and monitor for proper seating, level positioning, and heat reflection. Address any issues immediately before they affect cooking performance.
This drip pan is compatible with electric coil ranges only. The 316048413 is designed for use with electric coil surface elements on Frigidaire and affiliated brand ranges. It is not compatible with smooth-top, induction, or gas ranges. Verify your range type (electric coil) matches before ordering.
The drip pan reflects heat upward toward cookware. The chrome surface reflects radiant heat from the surface element upward toward the cookware, improving heating efficiency and cooking performance. A clean, undamaged drip pan maximizes heat reflection.
This repair prevents food spills from reaching range interior. A properly functioning drip pan catches food spills and boil-overs before they reach the range's electrical components, preventing damage, corrosion, and potential fire hazards.
Verify the drip pan does not wobble or shift. After installation, gently press on the drip pan to verify it sits firmly in the cooktop opening and does not wobble or shift. A loose drip pan can cause the surface element to sit unevenly.The support tabs on the drip pan rim hold the element in position. The support tabs are precisely positioned to hold the surface element at the correct height and angle for optimal cooking performance. Ensure the element rests properly on these tabs.
This repair maintains cooktop safety and performance. A properly functioning drip pan is essential for safe, reliable cooktop operation. Damaged or warped drip pans can cause element misalignment, poor heating, and potential safety hazards. Replace damaged drip pans promptly.
Drip pans can be cleaned in the dishwasher. Chrome-plated drip pans are dishwasher-safe for easy cleaning. However, hand washing with mild dish soap is recommended to extend the life of the chrome plating.
Avoid using oven cleaner on drip pans. Harsh oven cleaners can damage the chrome plating and cause discoloration. Use only mild dish soap and warm water to clean drip pans.
Line drip pans with aluminum foil for easier cleaning. Some users line drip pans with aluminum foil to catch spills and make cleanup easier. However, ensure the foil does not cover the center hole or interfere with element seating. Caution: Foil liners can trap heat and cause warping—use with caution.
Replace drip pans every 2-3 years for optimal performance. Even with regular cleaning, drip pans can accumulate burnt-on residue and discoloration over time. Replace drip pans every 2-3 years to maintain optimal cooktop appearance and performance.
This repair extends range life and maintains resale value. Replacing damaged drip pans promptly maintains the cooktop's appearance and functionality, extending range life and preserving resale value.
The 8-inch drip pan is designed for high-wattage burners. The 8-inch drip pan is typically used with 2100-2500 watt large burner elements. The larger size provides greater heat reflection and spill capacity for high-output cooking.
Verify the drip pan material is chrome-plated galvanized steel. The 316048413 is constructed from chrome-plated galvanized steel for durability and corrosion resistance. Avoid aftermarket drip pans made from inferior materials that may warp or corrode quickly.
This drip pan provides maximum spill capacity. The 8-inch drip pan features a deeper bowl design compared to 6-inch pans, providing greater capacity to catch spills and boil-overs from large pots and pans.
Clean drip pans immediately after spills. Food spills that are allowed to bake onto the drip pan become increasingly difficult to remove and can cause permanent staining. Clean spills promptly while the drip pan is still warm (but not hot) for easiest cleanup.
Use baking soda paste for stubborn stains. For burnt-on residue that won't come off with soap and water, make a paste of baking soda and water, apply to the stain, let sit for 15-20 minutes, then scrub gently with a soft cloth. This removes stains without damaging the chrome plating.
Soak heavily soiled drip pans before scrubbing. For heavily soiled drip pans, soak in hot soapy water for 30-60 minutes before scrubbing. This loosens burnt-on residue and makes cleaning easier.
This repair improves cooking efficiency. A clean, reflective drip pan maximizes heat reflection toward cookware, improving cooking efficiency and reducing energy consumption. Replace damaged drip pans to maintain optimal heating performance.
Verify the drip pan is the correct depth. The 316048413 features a shallow bowl design that allows proper element clearance while providing adequate spill capacity. Using an incorrect depth drip pan can cause element contact or inadequate spill protection.
This drip pan is a genuine OEM part. The 316048413 is manufactured by Frigidaire to exact factory specifications, ensuring proper fit, durability, and performance. Avoid aftermarket drip pans that may not meet OEM quality standards.
