Dishwasher Leaving Dirty Dishes? Orbital Sprayer 5304517982 – Fix Uneven Wash Coverage Fast
Uneven wash results and dishes that come out still dirty are a clear sign the orbital sprayer in your Frigidaire dishwasher has failed or clogged beyond recovery. In most Frigidaire and Electrolux dishwashers, the orbital sprayer delivers a rotating, multi-directional spray pattern that reaches every corner of the tub. When it fails, spray coverage becomes uneven, food residue is left on dishes, and cleaning performance drops significantly. ⚡ Common failure point in Frigidaire FGID and FGIP series dishwashers. Part 5304517982 is the genuine OEM orbital sprayer that restores full 360° wash coverage and brings your dishwasher back to factory cleaning performance.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Dishwasher powers on and runs through cycles normally
- ✔ Water fills and drains correctly
- ✔ Water supply pressure is confirmed adequate
- ✔ ONLY problem is dishes coming out dirty or with uneven cleaning results
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Dishes come out dirty or with food residue after a full cycle
- Uneven cleaning — top rack clean but bottom rack dirty, or vice versa
- Sprayer arm is cracked, warped, or not rotating freely
- Visible mineral buildup or blockage in sprayer nozzles
✔ If these symptoms match, this is the most likely failed component in the wash system.
✔ In most cases, replacing this orbital sprayer restores full cleaning performance immediately.
📦 Part Details
- Part Number: 5304517982
- Type: Dishwasher Orbital Sprayer — multi-directional rotating spray arm assembly
- Brands: Frigidaire, Electrolux
While the sprayer is out, inspect the wash pump and inlet valve for wear or reduced flow. Low water pressure feeding the sprayer is a common secondary cause of poor wash results — addressing both at once prevents a repeat call.
⚙️ Installation
Skill Level: Easy — 15–20 minutes. Disconnect power before servicing. Remove the lower dish rack to access the sprayer assembly. Unclip or unscrew the existing orbital sprayer from the wash arm mount, align the new 5304517982 into position, and secure until it clicks. Restore power and run a test cycle to confirm full rotation and coverage.
✓ Compatible Models
Confirmed compatible with FGID2468UD0A, FGID2468UD1A, FGID2468UD2A, FGID2468UF0A, FGID2468UF1A, FGID2468UF2A, FGIP2468UD0A, FGIP2468UD1A, FGIP2468UD2A, FGIP2468UF0A, FGIP2468UF1A, FGIP2468UF2A plus additional Frigidaire and Electrolux dishwasher models. Contact us to verify your model number before ordering.
💡 Pro Tip
After installing the new orbital sprayer, check the rinse aid dispenser level. A depleted rinse aid reservoir is often mistaken for a spray arm problem — topping it up ensures the customer sees the full improvement from the new part right away.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
