Alliance Laundry Systems / Speed Queen Washer Drain Pump Assembly 805724P, Replaces 805724, 803921P, 803921, Fixes Washer leaves water in the tub or fails to drain
Genuine commercial washer drain pump assembly, yellow, rated 100–127 volts and 60 hertz. The assembly includes the pump-related components identified in Alliance parts manuals.
Genuine commercial washer drain pump assembly, yellow, rated 100–127 volts and 60 hertz. The assembly includes the pump-related components identified in Alliance parts manuals.
Is This the Right Part?
Common Symptoms
- Washer stops with water remaining in the tub
- Drain portion of the cycle is incomplete
- Pump hums or runs without moving water
- Unusual pump noise during draining
- Water leakage from the pump or connected hoses
Check Before Replacing
- Disconnect electrical power before inspection.
- Check the washer drain hose and accessible pump inlet area for kinks, restrictions, or foreign objects.
- Inspect the pump wiring connector and nearby hoses for loose connections, damage, or signs of leakage.
- If the pump is commanded on according to the washer’s service procedure, observe whether it runs and whether water moves; do not assume the pump is defective until hose restrictions and wiring are checked.
- Confirm that the replacement pump’s voltage and frequency ratings match the washer requirements.
Pro Tip
Part Details
Key Features
- Genuine Alliance Laundry Systems / Speed Queen commercial drain pump assembly
- Yellow assembly identification
- Rated 100–127 volts and 60 hertz
- Used in washer drain systems
- Official Alliance listing identifies 808196P as the replacement
Installation Notes
- Disconnect power before beginning service and follow the washer’s model-specific service instructions.
- Turn off water supplies and manage any residual water before disconnecting pump hoses.
- Transfer or reconnect hoses and electrical connectors to the replacement assembly only after comparing their routing and orientation with the original.
- Inspect hose connections and sealing surfaces during reassembly; replace damaged related components rather than forcing a leaking connection.
- After installation, run an appropriate drain or service test and check for proper water removal and leaks.
Verified Compatible Models
AFN50RSP113FW01, AFN50RSP113TW01, AFN50RSP115TW01, AFN50RSP115TW13, AFNE9BSP113FN01, AFNE9BSP113TN01, AFNE9BSP113TW01, AFNE9BSP115TN13, AFNE9BSP115TW01, AFNE9BSP115TW13, AFNE9BSP123DN04, AFNE9BSP123DW04, AFNE9RSP113TW01, AFNE9RSP115TW01, AFNE9RSP115TW13
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
