LG Dishwasher Upper Dishrack Assembly AHB32983761, Replaces 3750ED1005A, 3750ED1005B, 3750ED1005D, 3750ED1005E, 3751DD1002A, 3751DD1002B, 3751DD1005A, 3751DD1005B, AHB32983725, AHB32983726, AHB32983729, AHB32983734, AHB3

Genuine LG OEM upper dishrack assembly that holds dishes in the upper section of a dishwasher during the cleaning cycle.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Rack binds or does not slide smoothly despite apparently serviceable rollers, adjusters, and rails.
• Rack is visibly bent, damaged, or misshapen.
• Broken or missing tines no longer hold dishes securely.
• Rust or corrosion on the rack may stain dishes.

Check Before Replacing

• With the dishwasher empty, pull the upper rack fully forward and check for binding, uneven movement, or visible rack deformation.
• Inspect the rack frame and tines for breaks, bent sections, rust, or corrosion.
• Check that the rack rollers, adjusters, and support rails are seated and appear intact before attributing the issue to the rack assembly.
• After adjusting rack height, confirm both sides are at the same level and the spray arms rotate freely without contacting the rack or dishes.
• Verify that the rack can be pushed fully in and that the dishwasher door closes without interference.

Pro Tip

Part Details

Key Features

• Genuine LG OEM upper dishrack assembly.
• Provides organized upper-rack space for glasses, cups, bowls, and smaller dishes.
• Rack structure and tines help keep dishes separated and securely positioned.
• Designed for use with the dishwasher’s upper-rack support and height-adjustment system on applicable models.

Installation Notes

• Verify the appliance model before installation because the assembly is intended for select LG dishwashers.
• For snap-in rack-support designs, pull the empty rack forward to its stop, release the front supports from the rails, then release the rear supports as described in the applicable LG manual.
• To reinstall a snap-in rack, seat the rear supports behind the rear hooks first, pull the rack forward into position, then align and snap the front supports into the front hooks.
• Wear protective gloves and handle any screwdriver carefully when removing or replacing a rack identified by the manual as a snap-in service rack.
• After installation, check that the rack moves smoothly, both sides are aligned, the door closes, and the spray arms are unobstructed.

Verified Compatible Models

LDF6920BB, LDF6920ST, LDF6920WW, LDF7810BB, LDF7810ST, LDF7810WW, LDF7811BB, LDF7811ST, LDF7811WW, LDF7932BB, LDF7932ST, LDS5540BB, LDS5540ST, LDS5540WW, LDS5560ST

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.