LG Washer Lid Lock Switch Assembly EBF61215202, Replaces EBF61215203, TAW35618282, TAW35818286, Fixes Washer will not start because the lid is not detected as closed or locked
Genuine LG lid-lock/lid-switch assembly for top-load washers. It detects whether the washer lid is open or closed and prevents spinning and agitation when the lid is open.
Genuine LG lid-lock/lid-switch assembly for top-load washers. It detects whether the washer lid is open or closed and prevents spinning and agitation when the lid is open.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- dE or DL/door-error indication
- Washer stops before agitation or spinning
- Lid-lock assembly clicks repeatedly but the cycle does not begin
- Intermittent failure to start when the lid is closed
Check Before Replacing
- Unplug the washer and inspect the lid-lock area for visible obstruction, damage, or a lid that is not aligning correctly.
- With power disconnected, inspect the switch harness connector for looseness, corrosion, or damaged wiring; do not pull on the wires.
- If qualified to use a multimeter, test the switch continuity only with the washer unplugged and according to the model-specific service documentation.
- If the switch tests correctly, the error may involve the harness, lid alignment, or control system rather than this component; do not bypass the lid-lock safety circuit.
Pro Tip
Part Details
Key Features
- Genuine LG washer switch assembly
- For top-load washer lid-lock applications
- Detects lid-open/lid-closed status
- Provides the safety interlock that prevents agitation and spinning with the lid open
- Archived replacement number EBF61215204 is retained as the approved successor
Installation Notes
- Disconnect electrical power before accessing or replacing the assembly.
- Use the washer's model-specific service instructions because access and fastener locations can vary.
- Do not pull on wiring when disconnecting the harness; release the connector and inspect that it is fully seated during reassembly.
- Confirm that the lid and lock mechanism align normally before returning the washer to service.
- Never operate the washer with the lid-lock safety circuit bypassed.
Verified Compatible Models
79631402410, 79631403410, 79631422410, 79631462410, T2004DPX, TS1202DPH, TS1203HDPH, TS1301DP, TS1303DPH, TS1304DPH, TS1604DP, TS1604DPH, TS1804DP, TS1804DPH, TS2004DPH, WFS1439EPD, WFS1459EPD, WFS1739EKD, WFS1739NHD, WFS1759EKD, WFS1919EKD, WFS1939EKD, WFS1939NHD, WFS1959EKD, WFS2018EKD, WFS2028EKD, WFS2038EKD, WFS2118EKD, WFS2138EKD, WFS2139EKD, WT12WS6, WT13SS6, WT13VS6, WT13VS6H, WT13VSS6, WT14SS6, WT14WS6, WT17BS6, WT19BS6, WT19WS6, WT21BSS6, WT21SS6, WT21VSS6, WT21WS6, WT22BSS6, WT1101CW, WT1301CW/00, WT1701CV/01, WT1801HVA, WT1801HWA
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
