Whirlpool Refrigerator Pantry Drawer End Cap Kit, Left and Right W10874836, Replaces W10870281, W10845509, W10845508, WPW10874836, 12656106, 12656023, 12656022, 12656019, 12656013, WP12656106, 12656104, WP12656023, WP126

Genuine Whirlpool OEM pantry drawer end-cap kit. Includes the left- and right-side end caps used to support and retain the refrigerator pantry drawer; the kit is intended to be installed on both sides.

Is This the Right Part?

Common Symptoms

• Drawer binds, drags, or is difficult to open and close.
• Pantry drawer or cover will not stay in position.
• Visible cracking, breakage, or a missing end-cap clip or pin.
• Drawer appears misaligned at one side.

Check Before Replacing

• With the refrigerator door open, visually inspect both pantry-drawer end caps for cracks, broken clips, missing pieces, or looseness.
• Check that both left- and right-side end caps are present and that the drawer sits evenly on its supports or rails.
• Operate the pantry drawer gently and observe whether binding occurs at one end or whether the drawer fails to remain positioned.
• Compare the damaged components with the replacement kit and verify the appliance model in the owner’s manual before ordering or installing.
• Do not force the drawer if an end cap is broken or misaligned; remove stored items and discontinue use until the support is repaired.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM refrigerator pantry-drawer end-cap kit.
• Includes both left-hand and right-hand end caps.
• White plastic construction.
• Designed to snap or attach into the pantry-drawer support area and help contain and guide the drawer.
• The updated kit includes both sides; individual left- and right-side pieces are not supplied separately.
• Used with the associated retaining pins or mounting hardware where applicable.

Installation Notes

• Consult the refrigerator owner’s manual and disconnect power before beginning service when required by the manual.
• Remove the pantry drawer and any obstructing crisper components carefully enough to expose the end-cap supports.
• Remove the damaged end-cap components and retaining hardware only as described for the specific refrigerator model.
• Install both replacement end caps in their corresponding left- and right-side positions, ensuring they are fully seated and secured.
• Reinstall the drawer and confirm smooth, unobstructed movement before returning food to the drawer.
• Do not force-fit the caps; stop if the mounting points, drawer, or support structure do not align with the replacement parts.

Verified Compatible Models

10672012010, 10672013010, 10672013017, 10672019010, 10678586800, 59672012010, 59672012011, 59672012012, 59672012014, 59672012016, 59672013010, 59672013011, 59672013012, 59672013013, 59672013014

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.