Whirlpool Refrigerator Ice Maker W11087434, Replaces W10774434

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• No ice production or reduced ice production.
• Ice forms but is not dumped into the ice bin.

Check Before Replacing

• Verify the refrigerator/freezer temperatures are set appropriately; Whirlpool recommends 0°F (-18°C) for the freezer and 33–40°F (0–4°C) for the refrigerator.
• Check that the household water supply is on, the water filter is not overdue, and the water line behind the refrigerator is not kinked.
• Visually inspect for a frozen water inlet tube behind the ice maker; do not force or chip ice from the tube.
• If ice is being made but not dumped into the bin, disconnect refrigerator power for one minute, restore power, then allow several hours to observe ice production.
• These checks help rule out water-supply, temperature, and dispensing conditions; they do not by themselves confirm that W11087434 has failed.

Pro Tip

Part Details

Installation Notes

• Disconnect refrigerator power or switch off the circuit breaker before servicing.
• For the documented installation arrangement, remove the ice-maker mounting screws, disconnect the wiring connector, and install the replacement in reverse order.
• Retain and reinstall the applicable cover/panel and mounting hardware; confirm the exact refrigerator model accepts W11087434 before installation.

Verified Compatible Models

KBSD602ESS01, KBSD608EBS01, KBSD608ESS01, KBSD612ESS01, KBSD618ESS01, KSSC42QVS10

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.