Range Controls Not Responding? Electronic Control Board W11536795 — Fix It Fast

If your electric range has unresponsive touch controls, won't hold temperature settings, or displays error codes that won't clear, the electronic control board is the most common cause. In most Whirlpool and Amana electric ranges, the control board fails due to power surges, heat stress, or component fatigue — causing the range to lose communication with the oven, burners, or display. When it fails, the range may be completely dead, partially functional, or stuck in an error state. ⚡ High-failure component in Whirlpool-platform electric ranges — especially after power events. Part W11536795 is the genuine OEM replacement control board that restores full range functionality — controls, timers, oven, and display — immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ The range has power — clock or display shows something, or breaker is confirmed on
• ✔ The heating elements and burners are not visibly damaged
• ✔ The wiring harness connections to the board are intact and undamaged
• ✔ The temperature sensor has been tested and is within spec
• ✔ ONLY problem is unresponsive controls, error codes, or erratic oven/burner behaviour

🔧 Common Symptoms

• Touchpad buttons don't respond or respond intermittently
• Oven won't heat even though the element tests good
• Error codes (F1, F3, F5, or similar) that won't clear after power cycling
• Display is blank, flickering, or showing garbled characters
• Oven temperature is erratic — overshoots or undershoots set temp
• Range works partially — some functions work, others are completely dead

✔ If these symptoms match, this is the most likely failed component in the control system.

✔ In most cases, replacing the electronic control board restores full range operation immediately.

📦 Part Details

• Part Number: W11536795
• Type: OEM Range Electronic Control Board (ERC / Clock Assembly)
• Replaces: W11204488, W11297558, W11511570 — no modification required
• Brands: Whirlpool, Amana

⚙️ Installation Notes

Skill Level: MODERATE — 30–45 minutes. Basic tools required. Disconnect power at the breaker before servicing. The control board is typically accessed by removing the rear console panel or the back of the control panel. Photograph all wiring harness connections before disconnecting. Transfer connectors one at a time to the new board to avoid mis-wiring. Reassemble and restore power to test all functions before closing up.

💡 Pro Tip

✓ Model-Specific Repair Pages