GE Appliances Element Heating ASM / Dishwasher Heating Element WD05X24776, Replaces WD05X23763, WD05X21716, WD05X21294, WD05X10015

Genuine GE dishwasher heating element assembly. The element heats wash water during the dishwasher cycle and assists with drying.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Poor cleaning because wash water is not heated adequately
• Dishes not drying properly
• Visible element damage, such as burn-through, warping, or scorching
• Possible leakage around the element terminal seals if the assembly or seals are damaged

Check Before Replacing

• Disconnect electrical power before inspection.
• After the dishwasher is completely cool, visually inspect the exposed heating element for burn-through, cracking, severe discoloration, warping, or foreign objects contacting it.
• Check whether the dishwasher is supplied with hot water and whether the selected cycle includes a heating or heated-dry phase.
• If qualified to perform electrical testing, test the element for continuity with power disconnected and the wiring removed; an open circuit indicates the element requires further service evaluation.
• Inspect the element terminals and connected wiring for loose, burned, corroded, or heat-damaged connections. Do not operate the dishwasher with damaged wiring or a visibly compromised element.

Pro Tip

Part Details

Key Features

• Genuine GE Appliances dishwasher heating element assembly
• Heat-resistant metal element designed for dishwasher wash and drying functions
• Installs as a direct replacement for the specified assembly when confirmed against the dishwasher model
• WD05X24776 is documented as replaced by GE manufacturer number WD05X30818

Installation Notes

• Disconnect electrical power to the dishwasher before beginning service.
• Allow the dishwasher and heating element to cool completely before handling.
• Remove the lower dish rack if needed to access the element from inside the tub.
• Disconnect the element wiring only after power is isolated, and inspect terminals for heat damage before reuse.
• Ensure the element is seated correctly and its terminal seals are properly positioned to avoid leakage.
• Restore power only after the element and wiring are securely installed; verify heating operation using the appliance’s normal or service-approved test procedure.

Verified Compatible Models

ADT521PGF4BS, ADT521PGF4WS, ADT521PGF6BS, ADT521PGF6WS, ADT521PGJ0BS, ADT521PGJ0WS, ADT521PGJ2BS, ADT521PGJ2WS, CDT706P2M4S1, CDT725SSF0SS, CDT725SSF4SS, CDT725SSF6SS, CDT725SSF7SS, CDT805P2N0S1, CDT835SMJ2DS

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.