GE Dishwasher Machine Control Board WG01F07916 – OEM Replacement (Replaces WD21X31840, WG04A05204)
GE Dishwasher Machine Control Board WG01F07916 – OEM Replacement (Replaces WD21X31840, WG04A05204)

GE Dishwasher Machine Control Board WG01F07916 – OEM Replacement (Replaces WD21X31840, WG04A05204)

Sale price
$220.78
Regular price
$247.27
You save
$26.49 (11%)

Frequently Bought Together

Stock Notification

Get notified when this product is available again

What Customers Say About XPart Supply

4.82 ★ (250)
Verified
Genuine OEM Replacement Part

GE Dishwasher Machine Control Board WG01F07916 – OEM Replacement (Replaces WD21X31840, WG04A05204)

Replaces WD21X31840 Replaces WG04A05204 Replaces WD21X31838, WD21X31839, WG01F08038 Item #750 in Diagram Fits CDT875, PDT785, ZDT925, ZDT985

WG01F07916 – Dishwasher Won't Start, Dead Panel, or Stuck Mid-Cycle? The Control Board Is Why

The machine control board is the central processor of your GE dishwasher — it manages cycle sequencing, water temperature, pump and valve timing, sensor inputs, and error code processing. When it fails due to power surges, moisture intrusion, or relay fatigue, the dishwasher may refuse to start, display a dead panel, stop mid-cycle, or run erratic wash sequences. WG01F07916 is the correct OEM replacement, directly superseding WD21X31840, WG04A05204, 265D3162G072, WD21X31838, WD21X31839, and WG01F08038.

⚡ Also Consider: Before replacing the board, check the door latch assembly and thermal fuse — these cheaper components can cause identical no-start symptoms. If error codes return after power cycling and all other components check out, the control board is the culprit.

Common Symptoms Fixed

  • Dishwasher won't start or respond to any button presses
  • Dead or completely blank control panel
  • Dishwasher stops mid-cycle with no explanation
  • Persistent error codes that return after power cycling
  • Specific functions (wash, rinse, dry, drain) not responding
  • Dishwasher fills with water but won't advance to wash cycle
  • Erratic or skipped cycle stages

Part Details

  • OEM Part Number: WG01F07916
  • Replaces: WG04A05204, 265D3162G072, WD21X31840, 265D3162G063, WD21X31838, WD21X31839, WG01F08038
  • Diagram Position: Item #750
  • Appliance Type: GE Built-In Dishwasher
  • Component: Machine Control Board (Main PCB)
  • Compatible Series: GE Café CDT875, GE Profile PDT785, GE Monogram ZDT925, ZDT985
  • OEM Manufacturer: GE Appliances
  • Fit: Direct OEM replacement — no modifications required

Buying Options

  • New (OEM): Genuine GE factory replacement — full lifespan, exact fit, no modifications required.
✔ Genuine OEM Part ✔ Replaces 7 Part Numbers ✔ Ships from Canada ✔ 45–60 Min DIY Repair

Installation Notes

Skill Level: Intermediate (45–60 minutes). Disconnect power to the dishwasher before starting — this board is static-sensitive, handle by edges only. Remove the inner door panel to access the control board mounting bracket. Photograph all wire harness connections before disconnecting anything. Remove the board mounting screws, swap the board, reconnect all harnesses per your photo, reassemble the door panel, restore power, and run a diagnostic cycle to confirm all functions.

Compatible Models

CDT875M5N5S5, CDT875M5N7S5, CDT875M5N8S5, CDT875P2N7S1, CDT875P2N8S1, CDT875P4N6W2, CDT875P4N7W2, CDT875P4N8W2, PDT785SYN7FS, PDT785SYN8FS, ZDT925SIN5II, ZDT925SIN7II, ZDT925SPN6SS, ZDT925SPN7SS, ZDT985SIN6II, ZDT985SPN6SS, ZDT985SSN6SS

Don't see your model? Contact us with your model number and we'll confirm compatibility before you order.

Why Order From XPart Supply

  • Ships from Canada — no cross-border delays or surprise duties
  • Genuine OEM parts, not grey-market substitutes
  • Knowledgeable team — contact us before you order if you're unsure
  • Replaces 7 superseded part numbers — one listing, confirmed fit
💡 Pro Tip — Static Damage & Harness Photos Are Everything:
Control boards are extremely sensitive to electrostatic discharge. Always ground yourself before handling — touch the dishwasher's metal frame or wear an anti-static wrist strap. Never set the board on carpet or plastic. Photograph every harness connector before you disconnect anything — a single misrouted connector on a dishwasher board can trigger the exact error codes you're trying to eliminate.
WG01F07916 – GE Dishwasher Machine Control Board Parts Diagram Item 750

✓ Model-Specific Repair Pages

ZDT925SIN5II

✅Compatibility & Cross Reference


Item #750 in diagram

Part number WG01F07916 replaces WG04A05204, 265D3162G072, WD21X31840, 265D3162G063, WD21X31838, WD21X31839, WG01F08038


CDT875M5N5S5, CDT875M5N7S5, CDT875M5N8S5, CDT875P2N7S1, CDT875P2N8S1, CDT875P4N6W2, CDT875P4N7W2, CDT875P4N8W2, PDT785SYN7FS, PDT785SYN8FS, ZDT925SIN7II, ZDT925SPN6SS, ZDT925SPN7SS, ZDT985SIN6II, ZDT985SPN6SS, ZDT985SSN6SS, ZDT925SIN5II

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Phone
1-877-899-7278
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions
Map showing warehouse location at 101 Trillium Dr, Kitchener
View on Google Maps