GE Refrigerator Defrost Heater Assembly WG03F00773, Replaces WR51X10101, WR51X10032, WR51X10053, WR9M446, Fixes Frost or ice buildup on the evaporator area
Genuine GE refrigerator defrost heater assembly with a dual-glass-element design, approximately 9 inches long. It melts frost from the evaporator during the automatic defrost cycle and replaced an earlier single-element design.
Genuine GE refrigerator defrost heater assembly with a dual-glass-element design, approximately 9 inches long. It melts frost from the evaporator during the automatic defrost cycle and replaced an earlier single-element design.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Heavy frost or an ice sheet behind the freezer’s rear panel
- Reduced airflow from evaporator frost blockage
- Fresh-food section warming while the freezer remains comparatively cold
- Refrigerator running for extended periods due to restricted evaporator airflow
Check Before Replacing
- Disconnect electrical power before accessing or testing the heater.
- Visually inspect the glass heating elements for breakage, scorching, or other damage.
- With power disconnected and the heater isolated according to the model’s service procedure, check the heater for electrical continuity; an open circuit indicates the heater cannot operate, but other defrost-system components may produce similar symptoms.
- Inspect the defrost thermostat, thermal fuse, wiring, and connectors because a heater symptom does not by itself identify the failed component.
- Confirm that the replacement’s element length, connector arrangement, and mounting configuration match the removed assembly.
Pro Tip
Part Details
Key Features
- Genuine GE refrigerator defrost heater assembly
- Dual-glass-element design
- Approximately 9 inches long
- Two heating elements used for the defrost cycle
- Melts frost from the evaporator fins during automatic defrost
Installation Notes
- Disconnect electrical power before removing panels or handling the defrost circuit.
- Access the evaporator and heater according to the refrigerator model’s service procedure.
- Compare the new assembly with the original before installation, including element length, connectors, supports, and mounting points.
- Route and reconnect wiring exactly as originally installed; inspect connectors and nearby wiring while accessible.
- Use care around the glass elements and evaporator tubing, and obtain qualified service if access or electrical testing is outside your experience.
Verified Compatible Models
GSE23GSECCSS, GSL22JFPCBS, GSRC3KLZAFWW, GSRS3KLZAFSS, GSS20GSDBSS, GSS20IEMACC, GSS22IBMACC, GSS23GSKPCSS, GSS23HGHBCBB, GSS23HGHBCWW, GSS23HMHBCES, GSS23WGTABB, GST22IBMACC, GST22IBMAWW, PSS23NSTASS, GSS23HSHBCSS
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
