GE Appliances Washer Agitator Assembly WH43X10034, Replaces WH43X0138, WH43X0142, WH43X138, WH43X142, WH43X25442

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Upper agitator section does not rotate or engage normally during agitation
• Broken, cracked, or missing agitator fins
• Agitator makes abnormal noise during operation
• Agitator is loose or wobbles excessively

Check Before Replacing

• Disconnect washer power before inspecting the agitator.
• With the washer empty and powered off, visually inspect the agitator for broken fins, cracks, excessive wear, or deformation.
• Check whether the agitator is loose or visibly wobbly when gently moved by hand; do not force it.
• Confirm that the agitator is seated fully on its coupler or drive shaft and that the visible engagement slots or splines appear aligned.
• If the agitator appears intact and properly seated but agitation remains ineffective, have the drive system and related components evaluated rather than assuming the agitator is the cause.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before beginning work.
• Remove any dispenser or cap that obstructs access, following the appliance-specific service procedure.
• The existing agitator is removed by lifting it straight up; some models may require access to a retaining fastener or coupler.
• Align the replacement assembly with the coupler or drive-shaft slots or splines and press it down firmly until fully seated.
• Reinstall any removed cap, dispenser, or retaining hardware before restoring power.
• Verify fit against the complete washer model number before installation; do not force the part if the engagement pattern does not align.

Verified Compatible Models

51451Y1WW, 51451Y2WW, 56231B0WW, 56231B1WW, 56231B2WW, 56231B3WW, 56241B0WW, 56241B1WW, 56241B2WW, 56241B3WW, 56251B0WW, 56251B1WW, 56251B2WW, 56421D0WW, 56421D5WW

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.