Whirlpool Refrigerator Pantry Drawer End Cap, Left Side WPW10122078, Replaces W10122078

Genuine Whirlpool OEM white plastic left-side end cap/pantry drawer support for a refrigerator pantry or deli drawer. The part supports and encloses the left side of the pantry drawer and helps retain the drawer cover.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Drawer-cover hinge pin, retaining tab, or support feature is broken.
• Pantry/deli drawer cover does not stay properly retained on the left side.
• Visible cracking, missing plastic, or looseness at the left drawer end cap.
• Drawer or cover alignment is abnormal because the left-side support is damaged.

Check Before Replacing

• With the refrigerator door open, identify the left side from the perspective of looking into the refrigerator.
• Visually inspect the end cap for cracks, missing plastic, a broken hinge pin, or a damaged cover-retaining tab.
• Check whether the pantry/deli drawer cover is securely supported and retained at the left end.
• Confirm that the suspected damage is on the left end cap; the right-side end cap is a different component.
• Before handling or removing the part, consult the refrigerator’s model-specific service or owner documentation for the applicable removal method.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM replacement part.
• White plastic construction.
• Left-side configuration only.
• Used on refrigerator pantry or deli drawer assemblies.
• Supports the drawer and helps retain the drawer cover.
• One end cap is supplied; the pantry drawer assembly uses separate left- and right-side end caps.

Installation Notes

• Disconnect refrigerator power before servicing, following the appliance owner’s or service documentation.
• Verify the replacement is the left-side end cap when looking into the refrigerator.
• Remove only the drawer, cover, shelf, or other components necessary for access, following model-specific instructions.
• Release or remove the original end cap using the retention method present on the refrigerator; do not force plastic tabs or mounts.
• Transfer any reusable drawer-rail component only if the model-specific service instructions require it and the replacement design supports that transfer.
• After installation, verify that the pantry/deli drawer and cover move freely and are properly retained before returning the refrigerator to normal use.

Verified Compatible Models

JFC2290VEM6, JFC2290VEP1, JFC2290VEP3, JFC2290VPF4, KFCO22EVBL4, KFCO22EVBL5, KFCP22EXMP1, KFCP22EXMP2, KFCS22EVBL2, KRFC302EBS05

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.