Whirlpool Washer Drain Hose Assembly WPW10189267, Replaces W10189267, Fixes Water leaking from the washer drain-hose area
Genuine Whirlpool OEM drain hose assembly that carries wastewater from the washer to the household drain. Also identified as a drain portal assembly.
Genuine Whirlpool OEM drain hose assembly that carries wastewater from the washer to the household drain. Also identified as a drain portal assembly.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Visible water leakage during or after draining
- Washer may not drain properly if the hose is kinked or obstructed
- Hose damage such as cracking, splitting, punctures, or rubbing wear
- Drips at the pump or drain-hose connection if the connection is loose
Check Before Replacing
- Unplug the washer before inspection.
- Check accessible portions of the hose for cracks, splits, punctures, rubbing damage, or visible water residue.
- Inspect the hose routing for sharp bends, kinks, or compression against the wall.
- Check that the hose remains connected at the washer and household-drain ends.
- If the hose appears intact, consider other possible causes of a no-drain symptom, such as the drain pump or a separate obstruction; do not replace this hose based on the symptom alone.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM washer drain hose assembly
- Designed to carry wastewater from the washer to the household drain
- Assembly is supplied as one complete drain-hose component rather than a separately serviceable hose and bucket
- Factory-certified replacement part for applicable Whirlpool-family washers
Installation Notes
- Disconnect electrical power and shut off the washer water supply before installation.
- Access requirements vary by washer model; the assembly may require removal of the washer cabinet or rear access components.
- Disconnect the hose from the drain pump and release the retaining clip or housing attachment before removing the old assembly.
- Route and secure the replacement hose in the original path, keeping it free of kinks and rubbing points.
- Reconnect the hose and any retaining clips or housing components in the reverse order of removal, then inspect for leaks during a controlled drain test.
Verified Compatible Models
7MDKL1301WQ0, 7MDKL1401WQ0, 7MDKL1501WQ0, 7MMMS0100VW1, 7MMMS0560WW0, 7MMPM0060VM1, 7MMPM0320WQ0, 7MMPS0070VM1, 7MMTM0300WQ0, 7MMTM0340WW0, 7MMTS0500WW0, 7MMTS0510XW0, 11018212701, 11018812701, 11020522900
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
