Whirlpool Refrigerator Water inlet valve WPW10258562, Replaces W10258562, Fixes Ice maker does not receive water
Whirlpool OEM secondary dual water inlet valve for refrigerators. It supplies water to the refrigerator ice maker and water dispenser and uses dual solenoids with quick-connect fittings.
Whirlpool OEM secondary dual water inlet valve for refrigerators. It supplies water to the refrigerator ice maker and water dispenser and uses dual solenoids with quick-connect fittings.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Ice maker not making ice
- Water dispenser not working or dispensing slowly
- Water leaking into the ice maker or refrigerator
- Ice maker overflowing because the valve does not shut off fully
Check Before Replacing
- Confirm the refrigerator’s water supply shutoff valve is open and the supply tubing is not kinked.
- Inspect the water filter, visible tubing, quick-connect fittings, and valve area for blockage, frost, or leaks.
- Check whether the dispenser works while the ice maker does not; because this is a dual valve, one solenoid can fail while the other continues operating.
- If electrical testing is appropriate for the model and is performed safely with power disconnected, compare the valve solenoid resistance with the applicable service documentation; do not apply live voltage unless qualified.
- If overflowing or leaking is reported, verify that household water pressure meets the valve’s required minimum before concluding that the valve is defective.
Pro Tip
Part Details
Key Features
- Whirlpool OEM refrigerator water inlet valve
- Secondary dual water inlet valve
- Separate solenoids for ice-maker and dispenser water circuits
- Quick-connect water fittings
- Whirlpool identifies the part as item 1873671 and states that it replaces W10258562
Installation Notes
- Disconnect refrigerator power and shut off the refrigerator water supply before service.
- The valve is located at the rear of the refrigerator near the water tubing and rear cover area; access may require removal of the rear cover.
- Label or photograph the electrical connectors and water tubes before disconnecting them so each connection is returned to the correct port.
- After installing the replacement, restore the water supply gradually and inspect every connection for leaks before replacing the rear cover and restoring power.
Verified Compatible Models
10651152110, 10651153110, 10651159110, BRS70HEANA00, BRS70HRANA00, BRS80ARANA00, GSC25C4EYB00, GSC25C4EYB01, GSC25C4EYB02, GSC25C4EYW00, GSC25C4EYW01, GSC25C4EYW02, GSC25C4EYY00, GSC25C4EYY01, GSC25C4EYY02
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
