Range Not Heating or Controls Unresponsive? Electronic Control Board WPW10287257 – Fix It Fast
When your KitchenAid or Whirlpool electric range won't heat, displays error codes, or the control panel stops responding, the electronic control board is the most common cause. In most KERS507 and YKER507 series ranges, this is caused by a failed control board. When it fails, the oven may not heat, surface elements may become unresponsive, or the display may show fault codes or go completely blank. ⚡ Common failure point in KitchenAid-built slide-in electric ranges. Part WPW10287257 is the genuine OEM replacement that restores full range control, heating, and display function.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your range powers on and the clock or display shows some activity
- ✔ The range door, interior light, and mechanical components work correctly
- ✔ Household circuit breaker and outlet voltage confirmed OK
- ✔ ONLY problem is oven not heating, unresponsive touch controls, or persistent error codes
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Oven will not heat on bake or broil settings
- Surface elements are unresponsive or behave erratically
- Control panel touchpad does not respond to input
- Display shows F-series error codes or goes blank
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this control board restores normal range operation immediately.
📦 Part Details
- Part Number: WPW10287257
- Type: Range Electronic Control Board (Main PCB Assembly)
- Replaces: W10287257
- Brands: KitchenAid, Whirlpool
Inspect the oven temperature sensor probe while the range is open — a faulty sensor can cause the same error codes and is often misdiagnosed as a board failure. Replacing both at the same time eliminates the most common root causes in a single service visit.
⚙️ Installation
Skill Level: Moderate — 30–45 minutes. Disconnect power before servicing. Remove the rear access panel or lift the control panel depending on your model, disconnect the wiring harness connectors from the old board, seat the new board, and reconnect all plugs. No soldering required — all connections are plug-and-play.
✓ Compatible Models
Confirmed compatible with KERS507XSS00, KERS507XSS01, KERS507XSS02, YKER507XSS00, YKER507XSS01, YKER507XSS02, YKER507XSS04 plus additional KitchenAid and Whirlpool slide-in range models. Contact us to verify your model number before ordering.
💡 Pro Tip
WPW10287257 has been discontinued by the OEM and stock is not being replenished. If your range needs this board, this is one of the last opportunities to source a genuine OEM replacement. Ordering a spare while stock lasts is strongly recommended for high-use kitchens — a second service call with no available part means appliance replacement.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
